|
MAX5384EUT Datasheet, PDF (1/15 Pages) Maxim Integrated Products – Low-Cost, Low-Power, 8-Bit DACs with 3-Wire Serial Interface in SOT23 | |||
|
19-1718; Rev 3; 1/09
Low-Cost, Low-Power, 8-Bit DACs with 3-Wire
Serial Interface in SOT23
General Description
The MAX5383/MAX5384/MAX5385 low-cost, 8-bit digital-
to-analog converters (DACs) in miniature 6-pin SOT23
packages have a simple 3-wire, SPIâ¢/QSPIâ¢/
MICROWIREâ¢-compatible serial interface that operates
up to 10MHz. The MAX5383 has an internal +2V refer-
ence and operates from a +2.7V to +3.6V supply. The
MAX5384 has an internal +4V reference and operates
from a +4.5V to +5.5V supply. The MAX5385 operates
over the full +2.7V to +5.5V supply range and has an
internal reference equal to 0.9 â VDD.
The MAX5383/MAX5384/MAX5385 require an extremely
low supply current of only 150µA (typ) and provide a
buffered voltage output. These devices power up at zero
code and remain there until a new code is written to the
DAC registers. This provides additional safety for appli-
cations that drive valves or other transducers that need
to be off on power-up. The MAX5383/MAX5384/
MAX5385 include a 1µA, low-power shutdown mode that
features software-selectable output loads of 1kâ¦, 100kâ¦,
or 1M⦠to ground.
Applications
Automatic Tuning (VCO)
Power Amplifier Bias Control
Programmable Threshold Levels
Automatic Gain Control
Automatic Offset Adjustment
SPI and QSPI are trademarks of Motorola, Inc.
MICROWIRE is a trademark of National Semiconductor Corp.
Typical Operating Circuit
+2.7V TO +5.5V
MC68XXXX
PCS0
MOSI
SCK
GND
VDD
CS
OUT
DIN MAX5385
SCLK
Features
⦠8-Bit Resolution in a Miniature 6-Pin SOT23
Package
⦠Wide +2.7V to +5.5V Supply Range (MAX5385)
⦠<1µA Shutdown Mode
⦠Software-Selectable Output Resistance During
Shutdown
⦠Buffered Output Drives Resistive Loads
⦠Low-Glitch Power-On Reset to Zero DAC Output
⦠3-Wire SPI/QSPI/MICROWIRE-Compatible Interface
⦠< ±5% Full-Scale Error (MAX5385)
⦠< ±1LSB max INL/DNL
⦠Low 230µA (max) Supply Current
Ordering Information
PART
PIN-
SOT
TEMP RANGE PACKAGE TOP MARK
MAX5383EUT+T -40°C to +85°C 6 SOT23
AADF
MAX5383EZT+T -40°C to +85°C 6 SOT23-Thin AAAH
MAX5384EUT+T -40°C to +85°C 6 SOT23
AADH
MAX5384EZT+T -40°C to +85°C 6 SOT23-Thin AAAI
MAX5385EUT+T -40°C to +85°C 6 SOT23
AADJ
MAX5385EZT+T -40°C to +85°C 6 SOT23-Thin AAAJ
+Denotes lead(Pb)-free/RoHS-compliant package.
T = Tape and reel.
Selector Guide
PART
MAX5383
MAX5384
MAX5385
INTERNAL REFERENCE
2V
4V
0.9 â VDD
Pin Configuration
TOP VIEW
+
OUT 1
6 CS
GND 2
VDD 3
MAX5383
MAX5384
MAX5385
5 SCLK
4 DIN
SOT23
________________________________________________________________ Maxim Integrated Products 1
For price, delivery, and to place orders, please contact Maxim Distribution at 1-888-629-4642,
or visit Maximâs website at www.maxim-ic.com.
|
▷ |