English
Language : 

MAX5187 Datasheet, PDF (1/16 Pages) Maxim Integrated Products – 8-Bit, 40MHz, Current/Voltage-Output DACs
19-1582; Rev 0; 12/99
8-Bit, 40MHz, Current/Voltage-Output DACs
General Description
The MAX5187 is an 8-bit, current-output digital-to-ana-
log converter (DAC) designed for superior performance
in signal reconstruction or arbitrary waveform genera-
tion applications requiring analog signal reconstruction
with low distortion and low-power operation. The volt-
age-output MAX5190 provides equal specifications,
with on-chip precision resistors for voltage output oper-
ation. Both devices are designed for a 10pVs glitch
operation to minimize unwanted spurious signal com-
ponents at the output. An on-board +1.2V bandgap cir-
cuit provides a well-regulated, low-noise reference that
can be disabled for external reference operation.
The MAX5187/MAX5190 are designed to provide a high
level of signal integrity for the least amount of power
dissipation. They operate from a single supply of +2.7V
to +3.3V. Additionally, these DACs have three modes of
operation: normal, low-power standby, and full shut-
down, which provides the lowest possible power dissi-
pation with a 1µA (max) shutdown current. A fast
wake-up time (0.5µs) from standby mode to full DAC
operation allows for power conservation by activating
the DAC only when required.
The MAX5187/MAX5190 are packaged in a 24-pin
QSOP and are specified for the extended (-40°C to
+85°C) temperature range. For higher resolution, 10-bit
versions, see the MAX5181/MAX5184 data sheet.
Applications
Signal Reconstruction
Digital Signal Processing
Arbitrary Waveform Generation (AWG)
Imaging Applications
Features
o +2.7V to +3.3V Single-Supply Operation
o Wide Spurious-Free Dynamic Range: 70dB
at fOUT = 2.2MHz
o Fully Differential Output
o Low-Current Standby or Full Shutdown Modes
o Internal +1.2V Low-Noise Bandgap Reference
o Small 24-Pin QSOP Package
PART
MAX5187BEEG
MAX5190BEEG
Ordering Information
TEMP. RANGE
-40°C to +85°C
-40°C to +85°C
PIN-PACKAGE
24 QSOP
24 QSOP
Pin Configuration
TOP VIEW
CREF 1
OUTP 2
OUTN 3
AGND 4
AVDD 5
DACEN 6
PD 7
CS 8
CLK 9
REN 10
DGND 11
DGND 12
MAX5187
MAX5190
QSOP
24 REFO
23 REFR
22 DGND
21 DVDD
20 D7
19 D6
18 D5
17 D4
16 D3
15 D2
14 D1
13 D0
________________________________________________________________ Maxim Integrated Products 1
For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800.
For small orders, phone 1-800-835-8769.