MAX5182 Datasheet, PDF (1/16 Pages) Maxim Integrated Products – Dual, 10-Bit, 40MHz Current/Voltage Alternate-Phase Output DACs

19-1578; Rev 0; 12/99
Dual, 10-Bit, 40MHz Current/Voltage
Alternate-Phase Output DACs
General Description
The MAX5182 is a dual, 10-bit, alternate-phase-update,
current-output digital-to-analog converter (DAC)
designed for superior performance in systems requiring
analog signal reconstruction with low distortion and
low-power operation. The MAX5185 provides equal
specifications, with on-chip output resistors for voltage-
output operation. Both devices are designed for 10pV-s
glitch operation, to reduce distortion and minimize
unwanted spurious signal components at the output. An
on-board +1.2V bandgap circuit provides a well-regu-
lated, low-noise reference that can be disabled for
external reference operation.
The MAX5182/MAX5185 are designed to provide a high
level of signal integrity for the least amount of power dis-
sipation. Both DACs operate from a +2.7V to +3.3V sin-
gle supply. Additionally, these DACs have three modes
of operation: normal, low-power standby, and complete
shutdown. A full shutdown provides the lowest possible
power dissipation with a maximum shutdown current of
1µA. Fast wake-up time (0.5µs) from standby mode to
full DAC operation allows for power conservation by
activating the DACs only when required.
The MAX5182/MAX5185 are available in a 28-pin QSOP
package and are specified for the extended (-40°C to
+85°C) temperature range. For pin-compatible 8-bit
versions, refer to the MAX5188/MAX5191 data sheet.
Applications
Signal Reconstruction
Digital Signal Processing
Arbitrary Waveform Generators (AWGs)
Imaging Applications
Features
o +2.7V to +3.3V Single-Supply Operation
o Wide Spurious-Free Dynamic Range: 70dB at
f_OUT = 2.2MHz
o Fully Differential Outputs for Each DAC
o ±0.5% FSR Gain Mismatch Between DAC Outputs
o Low-Current Standby or Full Shutdown Modes
o Internal +1.2V Low-Noise Bandgap Reference
o Small 28-Pin QSOP Package
PART
MAX5182BEEI
MAX5185BEEI
Ordering Information
TEMP. RANGE
-40°C to +85°C
-40°C to +85°C
PIN-PACKAGE
28 QSOP
28 QSOP
Pin Configuration
TOP VIEW
CREF1 1
OUT1P 2
OUT1N 3
AGND 4
AV_DD 5
DACEN 6
PD 7
CS 8
CLK 9
N.C. 10
REN 11
D0 12
D1 13
D2 14
MAX5182
MAX5185
QSOP
28 CREF2
27 OUT2P
26 OUT2N
25 REFO
24 REFR
23 DGND
22 DV_DD
21 D9
20 D8
19 D7
18 D6
17 D5
16 D4
15 D3
________________________________________________________________ Maxim Integrated Products 1
For free samples & the latest literature: http://www.maxim-ic.com, or phone [phone].
For small orders, phone [phone].