MAX5101 Datasheet, PDF (1/8 Pages) Maxim Integrated Products – +2.7V to +5.5V, Low-Power, Triple, Parallel 8-Bit DAC with Rail-to-Rail Voltage Outputs

19-1560; Rev 0; 10/99
+2.7V to +5.5V, Low-Power, Triple, Parallel
8-Bit DAC with Rail-to-Rail Voltage Outputs
General Description
The MAX5101 parallel-input, voltage-output, triple 8-bit
digital-to-analog converter (DAC) operates from a sin-
gle +2.7V to +5.5V supply and comes in a space-sav-
ing 16-pin TSSOP package. Internal precision buffers
swing Rail-to-Rail^®. For all three DACs, the internal ref-
erence voltage is tied to V_DD.
The MAX5101 has separate input latches for each of its
three DACs. Data is transferred to the input latches
from a common 8-bit input port. The DACs are individu-
ally selected through address inputs A0 and A1 and
are updated by bringing WR low.
The MAX5101 features a 1µA software shutdown mode,
as well as a power-on reset mode that resets all regis-
ters to code 00 hex on power-up.
Applications
Digital Gain and Offset Adjustment
Programmable Attenuators
Portable Instruments
Power-Amp Bias Control
Features
o +2.7V to +5.5V Single-Supply Operation
o Ultra-Low Supply Current
0.3mA while Operating
1µA in Software Shutdown Mode
o Ultra-Small 16-Pin TSSOP Package
o Output Buffer Amplifiers Swing Rail-to-Rail
o Power-On Reset Sets All Registers to Zero
Ordering Information
PART
MAX5101AEUE
MAX5101BEUE
TEMP. RANGE
-40°C to +85°C
-40°C to +85°C
PIN-
PACKAGE
16 TSSOP
16 TSSOP
INL
(LSB)
±1
±2
Functional Diagram
Pin Configuration
D0–D7
A0
A1
INPUT
LATCH A
INPUT
LATCH B
INPUT
LATCH C
CONTROL
LOGIC
WR
DAC A
DAC B
DAC C
MAX5101
OUTA
OUTB
OUTC
TOP VIEW
OUTB 1
OUTA 2
V_DD 3
WR 4
D7 5
D6 6
D5 7
D4 8
MAX5101
16 OUTC
15 GND
14 A0
13 A1
12 D0
11 D1
10 D2
9 D3
TSSOP
Rail-to-Rail is a registered trademark of Nippon Motorola, Ltd.
________________________________________________________________ Maxim Integrated Products 1
For free samples & the latest literature: http://www.maxim-ic.com, or phone [phone].
For small orders, phone [phone].