MAX5054 Datasheet, PDF (1/17 Pages) Maxim Integrated Products – 4A, 20ns, Dual MOSFET Drivers

19-3348; Rev 0; 8/04
4A, 20ns, Dual MOSFET Drivers
General Description
The MAX5054–MAX5057 dual, high-speed MOSFET
drivers source and sink up to 4A peak current. These
devices feature a fast 20ns propagation delay and 20ns
rise and fall times while driving a 5000pF capacitive
load. Propagation delay time is minimized and matched
between the inverting and noninverting inputs and
between channels. High sourcing/sinking peak cur-
rents, low propagation delay, and thermally enhanced
packages make the MAX5054–MAX5057 ideal for high-
frequency and high-power circuits.
The MAX5054–MAX5057 operate from a 4V to 15V single
power supply and consume 40µA (typ) of supply current
when not switching. These devices have internal logic
circuitry that prevents shoot-through during output state
changes to minimize the operating current at high
switching frequency. The logic inputs are protected
against voltage spikes up to +18V, regardless of the V_DD
voltage. The MAX5054A is the only version that has
CMOS input logic levels while the MAX5054B/MAX5055/
MAX5056/MAX5057 have TTL input logic levels.
The MAX5055–MAX5057 provide the combination of dual
inverting, dual noninverting, and inverting/noninverting
input drivers. The MAX5054 feature both inverting and
noninverting inputs per driver for greater flexibility. They
are available in 8-pin TDFN (3mm x 3mm), standard SO,
and thermally enhanced SO packages. These devices
operate over the automotive temperature range of -40°C
to +125°C.
Applications
Power MOSFET Switching
Motor Control
Switch-Mode Power Supplies Power-Supply Modules
DC-DC Converters
Typical Operating Circuit
VIN
VOUT
Features
♦ 4V to 15V Single Power Supply
♦ 4A Peak Source/Sink Drive Current
♦ 20ns (typ) Propagation Delay
♦ Matching Delay Between Inverting and
Noninverting Inputs
♦ Matching Propagation Delay Between Two
Channels
♦ V_DD / 2 CMOS Logic Inputs (MAX5054AATA)
♦ TTL Logic Inputs
(MAX5054B/MAX5055/MAX5056/MAX5057)
♦ 0.1 x V_DD (CMOS) and 0.3V (TTL) Logic-Input
Hysteresis
♦ Up to +18V Logic Inputs (Regardless of V_DD
Voltage)
♦ Low Input Capacitance: 2.5pF (typ)
♦ 40µA (typ) Quiescent Current
♦ -40°C to +125°C Operating Temperature Range
♦ 8-Pin TDFN and SO Packages
Ordering Information
PART
TEMP RANGE
PIN-
PACKAGE
MAX5054AATA -40°C to +125°C 8 TDFN-EP*
MAX5054BATA -40°C to +125°C 8 TDFN-EP*
MAX5055AASA -40°C to +125°C 8 SO-EP*
MAX5055BASA -40°C to +125°C 8 SO
MAX5056AASA -40°C to +125°C 8 SO-EP*
MAX5056BASA -40°C to +125°C 8 SO
MAX5057AASA -40°C to +125°C 8 SO-EP*
MAX5057BASA -40°C to +125°C 8 SO
*EP = Exposed pad. Package code S8E-14.
TOP
MARK
AGS
AGR
—
—
—
—
—
—
PWM IN
MAX5054
VDD
INA+
OUTA
INA-
INB+
OUTB
INB-
GND
Selector Guide and Pin Configurations appear at end of
data sheet.
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.