|
MAX4717 Datasheet, PDF (1/15 Pages) Maxim Integrated Products – 4.5 Ω/20 Ω, 300MHz Bandwidth, Dual SPDT Analog Switches in UCSP | |||
|
19-2627; Rev 0; 10/02
4.5â¦/20â¦, 300MHz Bandwidth, Dual SPDT
Analog Switches in UCSP
General Description
The MAX4717/MAX4718 low-voltage, low on-resistance
(RON), dual single-pole/double throw (SPDT) analog
switches operate from a single +1.8V to +5.5V supply.
These devices are designed for USB 1.1 and audio
switching applications.
The MAX4717 features two 4.5⦠RON (max) SPDT
switches with 1.2⦠flatness and 0.3⦠matching between
channels. The MAX4718 features one 4.5⦠RON (max)
SPDT switch and one 20⦠RON (max) SPDT switch. The
20⦠switch has a guaranteed matching and flatness of
0.4⦠and 1.2â¦, respectively. These switches offer break-
before-make switching (1ns) with tON <80ns and tOFF
<40ns at +2.7V. The digital logic inputs are +1.8V logic
compatible with a +2.7V to +3.6V supply.
These switches are packaged in a chip-scale package
(UCSPâ¢), significantly reducing the required PC board
area. The chip occupies only a 2.0mm â 1.50mm area
and has a 4 â 3 bump array with a bump pitch of
0.5mm. These switches are also available in a 10-pin
µMAX package.
Applications
USB 1.1 Signal Switching Circuits
Battery-Operated Equipment
Audio/Video-Signal Routing
Headphone Switching
Low-Voltage Data-Acquisition Systems
Sample-and-Hold Circuits
Cell Phones
PDAs
UCSP is a trademark of Maxim Integrated Products, Inc.
Rail-to-Rail is a registered trademark of Nippon Motorola, Ltd.
Features
o USB 1.1 Signal Switching Compliant
o 2ns (max) Differential Skew
o -3dB Bandwidth: >300MHz
o Low 15pF On-Channel Capacitance
o Single-Supply Operation from +1.8V to +5.5V
o 4.5⦠RON (max) Switches (MAX4717/MAX4718)
0.3⦠(max) RON Match (+3.0V Supply)
1.2⦠(max) Flatness (+3.0V Supply)
o 20⦠RON (max) Switch (MAX4718)
0.4⦠(max) RON Match (+3.0V Supply)
1.2⦠(max) Flatness (+3.0V Supply)
o Rail-to-Rail® Signal Handling
o High Off-Isolation: -55dB (10MHz)
o Low Crosstalk: -80dB (10MHz)
o Low Distortion: 0.03%
o +1.8V CMOS-Logic Compatible
o <0.5nA Leakage Current at +25°C
Ordering Information
PART
TEMP RANGE
PIN/BUMP-
PACKAGE
TOP
MARK
MAX4717EUB
-40°C to +85°C 10 µMAX
â
MAX4717EBC-T* -40°C to +85°C 12 UCSP-12 ABH
MAX4718EUB
-40°C to +85°C 10 µMAX
â
MAX4718EBC-T* -40°C to +85°C 12 UCSP-12 ABI
Note: UCSP package requires special solder temperature pro-
file described in the Absolute Maximum Ratings section.
*UCSP reliability is integrally linked to the userâs assembly meth-
ods, circuit board material, and environment. See the UCSP reli-
ability notice in the UCSP Reliability section of this data sheet for
more information.
Pin Configurations/Functional Diagrams/Truth Tables
TOP VIEW
(BUMP SIDE DOWN)
MAX4717/MAX4718
GND
NC1 C1
B1
A1 NC2
IN1 C2
A2 IN2
COM1 C3
A3 COM2
NO1 C4
B4
V+
UCSP
A4 NO2
PART
MAX4717
MAX4718
SPDT1
4.5â¦
4.5â¦
SPDT2
4.5â¦
20â¦
MAX4717/MAX4718
IN_
NO_
NC_
0
OFF
ON
1
ON
OFF
SWITCHES SHOWN FOR LOGIC "0" INPUT
MAX4717/MAX4718
V+ 1
NO1 2
COM1 3
IN1 4
NC1 5
10 NO2
9 COM2
8 IN2
7 NC2
6 GND
µMAX
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maximâs website at www.maxim-ic.com.
|
▷ |