MAX4655_07 Datasheet, PDF (1/12 Pages) Maxim Integrated Products – High-Current, 10Ω, SPST, CMOS Analog Switches

19-1984; Rev 4; 6/07
High-Current, 10Ω, SPST, CMOS
Analog Switches
General Description
Maxim’s MAX4655–MAX4658 are medium-voltage
CMOS analog switches with low on-resistance of 10Ω
max, specifically designed to handle large switch cur-
rents. With a switch capability of up to 400mA peak cur-
rent and 300mA continuous current (MAX4655/
MAX4656), and up to 300mA peak current and 150mA
continuous current (MAX4657/MAX4658), these parts
can switch loads as low as 25Ω. They can replace reed
relays with a million times the speed and virtually unlim-
ited number of lifetime cycles. Normal power consump-
tion is only 3mW, whether the switch is on or off. These
parts are TTL/CMOS compatible and will switch any
voltage within its power-supply range.
These are SPST (single-pole/single-throw) switches.
The MAX4655/MAX4657 are normally closed (NC),
while the MAX4656/MAX4658 are normally open (NO).
The difference between the MAX4655/MAX4656 and
the MAX4657/MAX4658 is in the power dissipation of
their packages. Refer to the Absolute Maximum Ratings
and the Electrical Characteristics.
The MAX4655–MAX4658 power-supply range is from
±4.5V to ±20V for dual-supply operation and +9V to
+40V for single-supply operation. These switches can
operate from any combination of supplies, within a 40V
V+ to V- range. They conduct equally well in either direc-
tion and can handle rail-to-rail analog signals. The off-
leakage current is only 1nA max at T_A = +25°C. They are
available in 8-pin µMAX^®, TDFN, and SO packages, with
exposed paddle options for high-power applications.
Applications
Relay Replacement
Test Equipment
Communication Systems
xDSL Modems
PBX, PABX Systems
Audio Signal Routing
Audio Systems
PC Multimedia Boards
Redundant/Backup Systems
µMAX is a registered trademark of Maxim Integrated Products, Inc.
Features
♦ High Continuous Current Handling
300mA (MAX4655/MAX4656)
150mA (MAX4657/MAX4658)
♦ High Peak Current Handling
400mA (MAX4655/MAX4656)
300mA (MAX4657/MAX4658)
♦ 10Ω (max) On-Resistance (±15V supplies)
♦ V_L Not Required
♦ 1Ω (max) R_ON Flatness over Specified Signal
Range
♦ Rail-to-Rail Signal Handling
♦ +12V Single Supply or ±15V Dual Supply
Operation
♦ Pin Compatible with DG417, DG418
Ordering Information
PART
TEMP RANGE
PIN-PACKAGE
TOP
MARK
MAX4655ETA -40°C to +85°C 8 TDFN-EP*
AKT
MAX4655EUA -40°C to +85°C 8 µMAX
AAAL
MAX4655ESA -40°C to +85°C 8 SO
—
MAX4656ETA -40°C to +85°C 8 TDFN-EP*
AKU
MAX4656EUA -40°C to +85°C 8 µMAX
AAAM
MAX4656ESA -40°C to +85°C 8 SO
—
MAX4657EUA -40°C to +85°C 8 µMAX
—
MAX4657ESA -40°C to +85°C 8 SO
—
MAX4658EUA -40°C to +85°C 8 µMAX
—
MAX4658ESA -40°C to +85°C 8 SO
—
*EP = Exposed paddle.
Pin Configurations/
Functional Diagrams/Truth Tables
TOP VIEW
COM 1
8 _NC
N.C. ²
7 V-
GND ³
6 IN
V+
4
MAX4655/MAX4657
5
N.C.
μMAX/SO/TDFN
MAX4655/MAX4657
LOGIC
SWITCH
0
ON
1
OFF
SWITCHES SHOWN FOR LOGIC "0" INPUT
COM 1
8 _NO
N.C. ²
7 V-
GND ³
6 IN
V+
4
MAX4656/MAX4658
5
N.C.
μMAX/SO/TDFN
MAX4656/MAX4658
LOGIC
SWITCH
0
OFF
1
ON
N.C. = NO CONNECT
NC = NORMALLY CLOSED
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.