MAX4144 Datasheet, PDF (1/16 Pages) Maxim Integrated Products – High-Speed, Low-Distortion, Differential Line Receivers

19-1147; Rev 1; 1/98
EVAALVUAAILTAIOBNLEKIT
High-Speed, Low-Distortion,
Differential Line Receivers
________________General Description
The MAX4144/MAX4145/MAX4146 differential line
receivers offer unparalleled high-speed, low-distortion
performance. Using a three op-amp instrumentation
amplifier architecture, these ICs have fully symmetrical
differential inputs and a single-ended output. They
operate from ±5V power supplies and are capable of
driving a 150Ω load to ±3.7V. The MAX4144 has an
internally set closed-loop gain of +2V/V. The MAX4145
is optimized for gains from +1V/V to +10V/V, while the
MAX4146 is optimized for gains from +10V/V to
+100V/V. The MAX4145/MAX4146 require a single
external resistor to set the closed-loop gain.
These amplifiers use laser-trimmed, matched thin-film
resistors to deliver a common-mode rejection (CMR) of
up to 90dB at 10MHz. Using current-feedback tech-
niques, the MAX4144 achieves a 130MHz bandwidth
and a 1000V/µs slew rate. The MAX4145 achieves a
bandwidth of 180MHz and a slew rate of 600V/µs while
operating with a closed-loop gain of +1V/V, and the
MAX4146 features a bandwidth of 70MHz and a slew
rate of 800V/µs with a gain of +10V/V. Excellent differ-
ential gain/phase and noise specifications make these
amplifiers ideal for a wide variety of video and RF
signal-processing applications.
For a complete differential transmission link, use the
MAX4144/MAX4145/MAX4146 with the MAX4147 differ-
ential line driver (see the MAX4147 data sheet for more
information).
________________________Applications
Differential to Single-Ended Conversion
Twisted-Pair to Coaxial Converter
High-Speed Instrumentation Amplifier
Data Acquisition
Medical Instrumentation
High-Speed Differential Line Receiver
Pin Configurations appear at end of data sheet.
Typical Application Circuit appears at end of data sheet.
____________________________Features
MAX4144:
o +2V/V Internally Fixed Gain
o 130MHz Bandwidth
o 1000V/µs Slew Rate
o 70dB CMR at 10MHz
o -90dBc SFDR (f = 10kHz)
o Low Differential Gain/Phase: 0.03%/0.03°
o 800µA Shutdown
MAX4145:
o External Gain Selection from +1V/V to +10V/V
o 180MHz Bandwidth
o 90MHz 0.1dB Gain Flatness
o 600V/µs Slew Rate
o 75dB CMR at 10MHz
o -92dBc SFDR (f = 10kHz)
o Very Low Noise: 3.8nV/√Hz (G = +10V/V)
o 800µA Shutdown
MAX4146:
o External Gain Selection from +10V/V to +100V/V
o 70MHz Bandwidth (A_V = +10V/V)
o 800V/µs Slew Rate
o 90dB CMR at 10MHz
o -82dBc SFDR (f = 10kHz)
o Very Low Noise: 3.45nV/√Hz (G = +100V/V)
o 800µA Shutdown
_______________Ordering Information
PART
MAX4144ESD
MAX4144EEE
MAX4145ESD
MAX4145EEE
MAX4146ESD
MAX4146EEE
TEMP. RANGE
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
PIN-PACKAGE
14 SO
16 QSOP
14 SO
16 QSOP
14 SO
16 QSOP
________________________________________________________________ Maxim Integrated Products 1
For free samples & the latest literature: http://www.maxim-ic.com, or phone [phone]
For small orders, phone [phone] ext. 3468.