MAX4130 Datasheet, PDF (1/16 Pages) Maxim Integrated Products – Single/Dual/Quad, Wide-Bandwidth, Low-Power, Single-Supply, Rail-to-Rail I/O Op Amps

19-1089; Rev 2; 8/97
Single/Dual/Quad, Wide-Bandwidth, Low-Power,
Single-Supply, Rail-to-Rail I/O Op Amps
_______________General Description
The MAX4130–MAX4134 family of operational amplifiers
combines 10MHz gain-bandwidth product and excellent
DC accuracy with rail-to-rail operation at the inputs and
outputs. These devices require only 900µA per amplifier,
and operate from either a single supply (+2.7V to +6.5V)
or dual supplies (±1.35V to ±3.25V) with a common-
mode voltage range that extends 250mV beyond V_EE
and V_CC. They are capable of driving 250Ω loads and
are unity-gain stable. In addition, the MAX4131/
MAX4133 feature a shutdown mode in which the outputs
are placed in a high-impedance state and the supply
current is reduced to only 25µA per amplifier.
With their rail-to-rail input common-mode range and
output swing, the MAX4130–MAX4134 are ideal for low-
voltage, single-supply operation. Although the minimum
operating voltage is specified at 2.7V, the devices
typically operate down to 1.8V. In addition, low offset
voltage and high speed make them the ideal signal-
conditioning stages for precision, low-voltage data-
acquisition systems. The MAX4130 comes in the
space-saving SOT23-5 package.
____________________Selection Table
PART
MAX4130
MAX4131
MAX4132
MAX4133
MAX4134
AMPS PER
PACKAGE
1
1
2
2
4
SHUTDOWN
MODE
—
Yes
—
Yes
—
PIN-
PACKAGE
5 SOT23-5
8 SO/µMAX
8 SO/µMAX
14 SO
14 SO
____________________________Features
o 5-Pin SOT23-5 Package (MAX4130)
o +2.7V to +6.5V Single-Supply Operation
o Rail-to-Rail Input Common-Mode Voltage Range
o Rail-to-Rail Output Voltage Swing
o 10MHz Gain-Bandwidth Product
o 900µA Quiescent Current per Amplifier
o 25µA Shutdown Function (MAX4131/MAX4133)
o 200µV Offset Voltage
o No Phase Reversal for Overdriven Inputs
o Drive 250Ω Loads
o Stable with 160pF Capacitive Loads
o Unity-Gain Stable
______________Ordering Information
PART
TEMP. RANGE
PIN-
PACKAGE
SOT
TOP MARK
MAX4130EUK -40°C to +85°C 5 SOT23-5
AABB
MAX4131C/D 0°C to +70°C Dice*
—
MAX4131ESA -40°C to +85°C 8 SO
—
MAX4131EUA -40°C to +85°C 8 µMAX
—
Ordering Information continued at end of data sheet.
*Dice are specified at T_A = +25°C, DC parameters only.
__________Typical Operating Circuit
________________________Applications
Battery-Powered Instruments
Portable Equipment
Data-Acquisition Systems
Signal Conditioning
Low-Power, Low-Voltage Applications
Pin Configurations appear at end of data sheet.
+3V
SERIAL
INTERFACE
MAX147
3
SHDN
V_DD ¹
6 _DOUT
AIN ²
8 _SCLK
VREF ⁴
7 _CS
GND ⁵
MAX4131
________________________________________________________________ Maxim Integrated Products 1
For free samples & the latest literature: http://www.maxim-ic.com, or phone [phone].
For small orders, phone [phone] ext. 3468.