MAX40200EVKIT Datasheet, PDF (1/6 Pages) Maxim Integrated Products – Drops Less Than 45mV at 500mA

MAX40200 Evaluation Kit
Evaluates: MAX40200 “Ideal-Diode”
in a 4-Bump WLP
General Description
The MAX40200 evaluation kit (EV kit) provides a proven
design to evaluate the MAX40200 “ideal-diode”. This EV
kit demonstrates the MAX40200 in a tiny, space-saving
4-bump wafer-level package (WLP). The MAX40200 is
also available in a 5-pin SOT23 (MAX40200AUK+), which
is not compatible with this EV kit.
The MAX40200 EV kit PCB comes with two
MAX40200ANS+ devices installed. The MAX40200
device is a current-switch, which drops so little voltage as
to approximate an “ideal diode”.
The MAX40200 parts are available in a tiny 0.73mm x
0.73mm 4-bump WLP with a 0.35mm bump pitch and is
only 0.5mm high. It operates over the extended -40°C to
+125° C temperature range.
Features
●● Drops Less Than 45mV at 500mA
●● Less than 2µA Leakage When Reverse-Biased
●● Supply Voltage Range: Between 1.5V and 5.5V
●● Low Supply Quiescent Current: 7µA (typ), 18µA
(max)
●● Thermally Self-Protecting
●● Tiny 0.73mm x 0.73mm 4-bump WLP
●● -40°C to +125°C Temperature Range
●● Evaluates MAX40200ANS+
●● Accommodates Easy-to-Use Components
●● Proven PCB Layout
●● Fully Assembled and Tested
Ordering Information appears at end of data sheet.
19-8721; Rev 0; 11/16