MAX3676 Datasheet, PDF (1/16 Pages) Maxim Integrated Products – 622Mbps, 3.3V Clock-Recovery and Data-Retiming IC with Limiting Amplifier

19-1537; Rev 0; 7/99
622Mbps, 3.3V Clock-Recovery and
Data-Retiming IC with Limiting Amplifier
_____________________General Description ____________________________Features
The MAX3676 is a complete clock-recovery and data-
retiming IC incorporating a limiting amplifier. It is intend-
ed for 622Mbps SDH/SONET applications and operates
from a single +3.3V supply.
The MAX3676 is designed for both section-regenerator
and terminal-receiver applications in OC12/STM-4 trans-
mission systems. Its jitter performance exceeds all
SONET/SDH specifications.
The MAX3676 has two differential input amplifiers: one
accepts positive-referenced emitter-coupled logic
(PECL) levels, while the other accepts small-signal ana-
log levels. The analog inputs access the limiting amplifi-
er stage, which provides both a received-signal-strength
indicator (RSSI) and a programmable-threshold loss-of-
power (LOP) monitor. Selecting the PECL amplifier dis-
ables the limiting amplifier, conserving power. A
loss-of-lock (LOL) monitor is also incorporated as part of
the fully integrated phase-locked loop (PLL).
________________________Applications
SDH/SONET Receivers and Regenerators
SDH/SONET Access Nodes
Add/Drop Multiplexers
ATM Switches
o Single +3.3V or +5.0V Power Supply
o Exceeds ITU/Bellcore SDH/SONET Regenerator
Specifications
o Low Power: 237mW at +3.3V
o Selectable Data Inputs, Differential PECL or
Analog
o Received-Signal-Strength Indicator
o Loss-of-Power and Loss-of-Lock Monitors
o Differential PECL Clock and Data Outputs
o No External Reference Clock Required
_________________Ordering Information
PART
TEMP. RANGE PIN-PACKAGE
MAX3676EHJ
-40°C to +85°C 5mm 32 TQFP
MAX3676E/D
-40°C to +85°C Dice*
*Contact factory for availability. Dice are designed to operate
over a -40°C to +140°C junction temperature (T_j) range, but are
tested and guaranteed at T_j = +45°C.
Pin Configuration appears at end of data sheet.
Digital Cross-Connects
___________________________________________________ Typical Operating Circuit
100pF
PHOTO-
DIODE
+3.3V
+3.3V
2.2µF
0.01µF
0.1µF
INSEL PHADJ+ PHADJ-
FIL+
FIL- LOL
DDI+
V_CC
FILT
DDI-
MAX3664
INREF
OUT+
Z_O = 50Ω
C_IN
0.01µF
ADI+
MAX3676
100Ω
IN
OUT-
Z_O = 50Ω
ADI-
GND COMP
220pF
+3.3V
C_IN
0.01µF
V_CC
CFILT OLC+ OLC- GND RSSI INV
SDO+
SDO-
SCLKO+
SCLKO-
VTH LOP
C_F
47nF
C_OLC
33nF
R2
R1
20k
C_LOL
0.01µF
+3.3V
130Ω
130Ω
Z_O = 50Ω
Z_O = 50Ω
82Ω
82Ω
+3.3V
130Ω
Z_O = 50Ω
Z_O = 50Ω
82Ω
130Ω
82Ω
________________________________________________________________ Maxim Integrated Products 1
For free samples & the latest literature: http://www.maxim-ic.com, or phone [phone].
For small orders, phone [phone].