MAX3238E Datasheet, PDF (1/14 Pages) Maxim Integrated Products – +3.0V to +5.5V, 10nA, 250kbps RS-232 Transceivers with ±15kV ESD-Protected I/O and Logic Pins

19-1632; Rev 1; 6/01
+3.0V to +5.5V, 10nA, 250kbps RS-232 Transceivers
with ±15kV ESD-Protected I/O and Logic Pins
General Description
The MAX3238E/MAX3248E transceivers use Maxim’s
revolutionary AutoShutdown Plus™ feature to achieve
10nA supply current. These devices shut down the on-
board power supply and drivers when they do not sense
a valid signal transition on either the receiver or transmit-
ter inputs. This occurs if the RS-232 cable is disconnect-
ed or if the transmitters of the connected peripheral are
turned off. The devices turn on again when a valid transi-
tion is applied to any RS-232 receiver or transmitter input.
AutoShutdown Plus automatically achieves this power
savings through its on-board circuitry, as no changes are
required to the existing BIOS or operating system.
All RS-232 inputs and outputs, as well as the logic I/O
pins, have enhanced ESD protection to ±15kV. The addi-
tional ESD protection on the logic I/O pins makes the
MAX3238E/MAX3248E ideal for cell phone data cable
applications because it eliminates the need for costly
external TransZorb™ or protection schemes.
The MAX3238E/MAX3248E contain five drivers and three
receivers and are 3V-powered EIA/TIA-232 and V.28/V.24
communication interfaces intended for cell phones, data
cables, and modem applications. A proprietary, high-effi-
ciency, dual charge-pump power supply and a low-
dropout transmitter combine to deliver true RS-232
performance from a single +3.0V to +5.5V supply. A
guaranteed data rate of 250kbps provides compatibility
with popular software for communicating with personal
computers.
The MAX3238E and the MAX3248E differ only in their
input logic thresholds. The MAX3238E has standard logic
thresholds, while the MAX3248E has low-level logic
thresholds of 0.6V to 1.2V, which are ideal for 1.8V sys-
tems.
The transmitter inputs, FORCEON, and FORCEOFF have
a 400kΩ active positive feedback resistor. Once driven to
a valid logic level, they will retain this level if the driving
signal is removed or goes high impedance. Unused
transmitter and logic inputs may be left unconnected. The
MAX3238E/MAX3248E can operate with supply voltages
ranging from +3.0V to +5.5V.
Applications
Cellular Data Cables
Modems
Battery-Powered Equipment
Peripherals
Data Cradles
Printers
AutoShutdown Plus is a trademark of Maxim Integrated Products.
TransZorb is a trademark of General Semiconductor Industries, Inc.
†_{Covered by U.S. Patent numbers 4,636,930; 4,679,134;}
4,777,577; 4,797,899; 4,809,152; 4,897,774; 4,999,761; and other
patents pending.
Features
o Enhanced ESD Protection on RS-232 I/O Pins and
All Logic Pins
±15kV—Human Body Model
±8kV—IEC 1000-4-2 Contact Discharge
±15kV—IEC 1000-4-2 Air-Gap Discharge
o Guaranteed Data Rate: 250kbps
o 10nA Low-Power Shutdown with Receivers Active
o Schmitt Triggers on All Inputs
o Flow-Through Pinout
o Meets EIA/TIA-232 Specifications Down to 3.0V
o Guaranteed 6V/µs Slew Rate
o Low-Level Logic Thresholds (MAX3248E)
o RS-232-Compatible Outputs to 2.7V
Ordering Information
PART
TEMP. RANGE
PIN-PACKAGE
MAX3238ECAI
0°C to +70°C
28 SSOP
MAX3238EEAI -40°C to +85°C
28 SSOP
MAX3248ECAI
0°C to +70°C
28 SSOP
MAX3248EEAI -40°C to +85°C
28 SSOP
Typical Operating Circuit appears at end of data sheet.
___________________Pin Configuration
TOP VIEW
C2+ ₁
GND 2
C2- 3
V- 4
T1OUT 5
T2OUT ₆
T3OUT 7
R1IN ₈
R2IN 9
T4OUT 10
R3IN 11
T5OUT 12
FORCEON 13
FORCEOFF 14
MAX3238E
MAX3248E
SSOP
28 _C1+
27 V+
26 VCC
25 C1-
24 T1IN
23 T2IN
22 _T3IN
21 R1OUT
20 R2OUT
19 T4IN
18 R3OUT
17 T5IN
16 R1OUTB
15 INVALID
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.