MAX3100_14 Datasheet, PDF (1/24 Pages) Maxim Integrated Products – SPI/MICROWIRE-Compatible UART in QSOP-16

AVAILABLE
MAX3100
SPI/MICROWIRE-Compatible
UART in QSOP-16
General Description
The MAX3100 universal asynchronous receiver transmit-
ter (UART) is the first UART specifically optimized for
small microcontroller-based systems. Using an
SPI™/MICROWIRE™ interface for communication with
the host microcontroller (µC), the MAX3100 comes in a
compact 16-pin QSOP. The asynchronous I/O is suitable
for use in RS-232, RS-485, IR, and opto-isolated data
links. IR-link communication is easy with the MAX3100’s
infrared data association (IrDA) timing mode.
The MAX3100 includes a crystal oscillator and a baud-
rate generator with software-programmable divider ratios
for all common baud rates from 300 baud to 230k baud.
A software- or hardware-invoked shutdown lowers quies-
cent current to 10µA, while allowing the MAX3100 to
detect receiver activity.
An 8-word-deep first-in/first-out (FIFO) buffer minimizes
processor overhead. This device also includes a flexible
interrupt with four maskable sources, including address
recognition on 9-bit networks. Two hardware-handshak-
ing control lines are included (one input and one output).
The MAX3100 is available in 14-pin plastic DIP and small,
16-pin QSOP packages in the commercial and extended
temperature ranges.
________________________Applications
Handheld Instruments
Intelligent Instrumentation
UART in SPI Systems
Small Networks in HV^FAC^unor^cB^tuⁱil^odiⁿng^aC^lo^Dntrⁱo^al ^grams
Isolated RS-232/RS-485: Directly Drives Opto-Couplers
Low-Cost IR Data Links for Computers/Peripherals
TOP VIEW
____________________________Features
♦ Small TQFN and QSOP Packages Available
♦ Full-Featured UART:
—IrDA SIR Timing Compatible
—8-Word FIFO Minimizes Processor
Overhead at High Data Rates
—Up to 230k Baud with a 3.6864MHz Crystal
—9-Bit Address-Recognition Interrupt
—Receive Activity Interrupt in Shutdown
♦ SPI/MICROWIRE-Compatible µC Interface
♦ Lowest Power:
—150µA Operating Current at 3.3V
—10µA in Shutdown with Receive Interrupt
♦ +2.7V to +5.5V Supply Voltage in Operating Mode
♦ Schmitt-Trigger Inputs for Opto-Couplers
♦ TX and RTS Outputs Sink 25mA for Opto-Couplers
Ordering Information
PART
TEMP RANGE PIN-PACKAGE
MAX3100CPD+
0°C to +70°C
14 Plastic DIP
MAX3100CEE+
0°C to +70°C
16 QSOP
MAX3100EPD+ -40°C to +85°C
14 Plastic DIP
MAX3100EEE+ -40°C to +85°C
16 QSOP
MAX3100ETG+ -40°C to +85°C
24 TQFN-EP*
+Denotes a lead(Pb)-free/RoHS-compliant package.
EP = Exposed pad.
Typical Operating Circuit appears at end of data sheet.
PPiinn CCoonnffiigguurraattiioonnss
+
DIN 1
DOUT 2
SCLK 3
CS 4 MAX3100
IRQ 5
SHDN 6
GND 7
14 V_CC
13 TX
12 RX
11 RTS
10 CTS
9 X1
8 X2
18 17 16 15 14 13
N.C. 19
12 N.C.
N.C. 20
11 X1
TX 21
V_CC 22
DIN 23
N.C. 24 ₊
1
MAX3100
*EP
2 3456
10 X2
9 GND
8 SHDN
7 N.C.
DIN 1
DOUT 2
SCLK 3
CS 4
N.C. 5
IRQ 6
SHDN 7
GND 8
Pin Configurations appear^Da^It^Pend of data sheet.
Functional Diagrams continued at end of data sheet.
TQFN-EP
UCSP is a trademark of Maxim Integrated Produ^*c^EPts⁼,^EI^Xn^Pc^O.^{SED PAD, CONNECT EP TO GROUND}
SPI is a trademark of Motorola, Inc. MICROWIRE is a trademark of National Semiconductor Corp.
+
MAX3100
QSOP
16 V_CC
15 TX
14 RX
13 RTS
12 N.C.
11 CTS
10 X1
9 X2
For pricing, delivery, and ordering information, please contact Maxim Direct
at 1-888-629-4642, or visit Maxim’s website at www.maximintegrated.com.
19-1259; Rev 2; 1/09