MAX3053 Datasheet, PDF (1/11 Pages) Maxim Integrated Products – ±80V Fault-Protected, 2Mbps, Low Supply Current CAN Transceiver

19-2425; Rev 0; 4/02
±80V Fault-Protected, 2Mbps,
Low Supply Current CAN Transceiver
General Description
The MAX3053 interfaces between the control area net-
work (CAN) protocol controller and the physical wires of
the bus lines in a CAN. It is primarily intended for indus-
trial systems requiring data rates up to 2Mbps and fea-
tures ±80V fault protection against shorts to
high-voltage power buses. The device provides differ-
ential transmit capability to the bus and differential
receive capability to the CAN controller.
The MAX3053 has three different modes of operation:
high-speed, slope control, and shutdown. High-speed
mode allows data rates up to 2Mbps. In slope control
mode, data rates are between 40kbps and 500kbps so
the effects of EMI are reduced and unshielded twisted
or parallel cable may be used. In shutdown mode, the
transmitter is switched off, and the receiver is switched
to a low-current mode.
An autoshutdown function puts the device in 15µA shut-
down mode when the bus or CAN controller is inactive
for 47ms or greater.
The MAX3053 is available in an 8-pin SO package and
is specified for -40°C to +125°C operation.
Applications
Industrial Control and Networks
Printers
Automotive Systems
HVAC Controls
Telecom 72V Systems
Features
o ±80V Fault Protection
o Three Operating Modes
High-Speed Operation up to 2Mbps
Slope Control Mode to Reduce EMI
(40kbps to 500kbps)
o 15µA Low-Current Shutdown Mode
o Autoshutdown when Device Is Inactive
o Automatic Wakeup from Shutdown
o Thermal Shutdown
o Current Limiting
o Fully Compatible with the ISO 11898 Standard
PART
MAX3053ESA
MAX3053ASA
Ordering Information
TEMP RANGE
-40°C to +85°C
-40°C to +125°C
PIN-PACKAGE
8 SO
8 SO
Pin Configuration appears at end of data sheet.
V_CC
100nF
Typical Operating Circuit
120Ω
TXD
CAN
CONTROLLER
RXD
GND
25kΩ TO 180kΩ
V_CC
CANH
TXD _MAX3053
CANL
RXD
100nF
SHDN
RS
GND
120Ω
________________________________________________________________ Maxim Integrated Products 1
For pricing delivery, and ordering information please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.