MAX3051 Datasheet, PDF (1/13 Pages) Maxim Integrated Products – +3.3V, 1Mbps, Low-Supply-Current CAN Transceiver

19-3274; Rev 0; 5/04
+3.3V, 1Mbps, Low-Supply-Current
CAN Transceiver
General Description
The MAX3051 interfaces between the CAN protocol
controller and the physical wires of the bus lines in a
controller area network (CAN). The MAX3051 provides
differential transmit capability to the bus and differential
receive capability to the CAN controller. The MAX3051
is primarily intended for +3.3V single-supply applica-
tions that do not require the stringent fault protection
specified by the automotive industry (ISO 11898).
The MAX3051 features four different modes of opera-
tion: high-speed, slope-control, standby, and shutdown
mode. High-speed mode allows data rates up to
1Mbps. The slope-control mode can be used to
program the slew rate of the transmitter for data rates of
up to 500kbps. This reduces the effects of EMI, thus
allowing the use of unshielded twisted or parallel cable.
In standby mode, the transmitter is shut off and the
receiver is pulled high, placing the MAX3051 in low-
current mode. In shutdown mode, the transmitter and
receiver are switched off.
The MAX3051 input common-mode range is from -7V to
+12V, exceeding the ISO 11898 specification of -2V to
+7V. These features, and the programmable slew-rate
limiting, make the part ideal for nonautomotive, harsh
environments. The MAX3051 is available in 8-pin SO
and SOT23 packages and operates over the -40°C to
+85°C extended temperature range.
Features
♦ Low +3.3V Single-Supply Operation
♦ Wide -7V to +12V Common-Mode Range
♦ Small SOT23 Package
♦ Four Operating Modes
High-Speed Operation Up to 1Mbps
Slope-Control Mode to Reduce EMI (Up to 500kbps)
Standby Mode
Low-Current Shutdown Mode
♦ Thermal Shutdown
♦ Current Limiting
PART
MAX3051ESA
MAX3051EKA-T
Ordering Information
TEMP RANGE
-40°C to +85°C
-40°C to +85°C
PIN-
PACKAGE
8 SO
8 SOT23-8
TOP
MARK
—
AEKF
Applications
Printers JetLink
Industrial Control and Networks
Telecom Backplane
Consumer Applications
Typical Operating Circuit at end of data sheet.
Pin Configuration
TOP VIEW
TXD 1
GND 2
V_CC 3
RXD 4
MAX3051
8 RS
7 CANH
6 CANL
5 SHDN
SO/SOT23
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.