MAX2510_1 Datasheet, PDF (1/8 Pages) Maxim Integrated Products – Evaluation Kit

19-1296; Rev 2; 1/01
MAX2510 Evaluation Kit
General Description
The MAX2510 evaluation kit (EV kit) simplifies testing of
the MAX2510 low-power IF transceiver with limiter/
received-signal-strength indicator (RSSI) and quadra-
ture modulator. This EV kit allows simple evaluation of
all chip functions in a 50Ω test environment.
Component Suppliers
SUPPLIER
Coilcraft
Murata-Erie
Sprague
PHONE/
FAX
INTERNET
[phone]/
[phone]
http://www.coilcraft.com
[phone]/
[phone]
http://www.murata.com
[phone]/
[phone]
—
Features
o +2.7V to +5.5V Single-Supply Operation
o Allows Testing of Advanced Power Management
(four modes):
< 1nA Shutdown
Receive
Transport
Standby
o 50Ω SMA Connector Interface
o Fully Assembled and Tested
PART
MAX2510EVKIT-SO
Ordering Information
TEMP. RANGE
-40°C to +85°C
IC PACKAGE
28 QSOP
DESIGNATION QTY
C1, C3
2
C2
1
C4
1
C6, C8
2
DESCRIPTION
0.01µF capacitors
330pF ceramic capacitor
0.047µF capacitor
47pF capacitors (0603)
C5, C10,
C30, C31
0 Not installed
C7, C9, C12,
C13, C21, C22, 8
C23, C27
C14, C15,
C17, C19
4
C18, C25
2
C20, C29
2
C24
1
0.1µF capacitors
0.001µF capacitors
10pF capacitors (0603)
0.022µF capacitors
10µF tantalum capacitor
Sprague 293D106X0010C2
L2
1
82nH inductor
Coilcraft 0805HS-820TKBC
L3, L4
2
47nH inductors
Coilcraft 0805HS-470TKBC
LO IN, I, Q,
RXIN, RXIN,
TXOUT, TXOUT,
9
MIXOUT, LIMIN
50Ω edge-mount SMA connectors
E.F. Johnson 142-0701-801
Component List
DESIGNATION QTY
R3, R11, R17 3
R4, R7, R8, R14 4
DESCRIPTION
50Ω resistors
5kΩ resistors
R1, R5
2
0Ω shorts (0603) (can be changed to
allow for other matching networks)
R9
1
Resistor—not installed (for back-
terminating an interstage filter)
R10, R15
2 280Ω 1% resistors
R16
1
Resistor—not installed (for adjusting
the RSSI output voltage range)
U1
1 MAX2510EEI (28 QSOP)
10.7MHz ceramic bandpass filter
U2
1 (Z_O = 330Ω), 3-pin through-hole footprint
Murata SFE10.7MA5-A
2 3-pin headers (0.1" center)
RXEN, TXEN
2 Shunts
None
1 MAX2510EV-SO circuit board
None
1 MAX2510EEI data sheet
Note: All resistors, capacitors, and inductors are surface-
mount components with an 0805 footprint, unless otherwise
specified. Filter U2 and the various jumpers are through-hole
mounted.
________________________________________________________________ Maxim Integrated Products 1
For price, delivery, and to place orders, please contact Maxim Distribution at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.