MAX2307 Datasheet, PDF (1/8 Pages) Maxim Integrated Products – Low-Power Cellular Upconverter-Driver

19-1897 Rev 0; 1/01
Low-Power ^{EVFAOLLULAOTWIOSNDKAITTAMSAHNEUEATL} Cellular Upconverter-Driver
General Description
The MAX2307 is an integrated RF upconverter-driver
optimized for the Japanese cellular frequency band. It
can also be used for applications in the US cellular and
ISM bands. Its low current consumption (15mA at
-15dBm output) extends the average talk time.
The image rejection is done using only two external
inductors at the upconverter output because the image
frequency in Japanese cellular phones is typically
330MHz away. This realizes the image rejection with no
current consumption penalty and only two inexpensive
off-chip components, saving cost and valuable board
space.
The MAX2307 has a separate shutdown control for the
LO buffer to minimize VCO pulling. It comes in an ultra-
small 3✕4 ultra-chipscale package (UCSP).
Features
o Ultra-Small Implementation Size
o Low Off-Chip Component Count
o 15mA at -15dBm P_OUT
o 34mA at +6.5dBm P_OUT and -53dBc ACPR
o <1µA Shutdown Mode
o Separate Shutdown for LO Buffer
o No External Logic Interface Circuitry Required
Cellular Handsets
cdmaOne™ Handsets
ISM Band
Applications
PART
MAX2307EBC
Ordering Information
TEMP. RANGE
-40°C to +85°C
PIN-PACKAGE
3×4 UCSP
A
VCC
Pin Configuration
TOP VIEW (BUMPS ON BOTTOM)
VCC
MIXP
VCC
MIXM
GND
B
LOIN/
SHDNLO
GC
RFOUT
C
GND
1
IFINP
2
IFINM
3
SHDN
4
V_CC
B4
RFOUT
B3
GC
C4
SHDN
Block Diagram
V_CC
VCCMIXP A2 A3 VCCMIXM
IFINM
C3
C2
IFINP
BIAS
CTRL
BIAS
CTRL2
B1 LOIN/SHDNLO
SHDNLO
LOIN
cdmaOne is a trademark of CDMA Development Group.
________________________________________________________________ Maxim Integrated Products 1
For price, delivery, and to place orders, please contact Maxim Distribution at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.