MAX2204_1 Datasheet, PDF (1/3 Pages) Maxim Integrated Products – Evaluation Kit

19-0779; Rev 0; 3/07
MAX2204 Evaluation Kit
General Description
The MAX2204 evaluation kit (EV kit) simplifies evalua-
tion of the MAX2204 RF power detector. The EV kit
enables testing of all functions with no additional sup-
port circuitry. The RF power-detector input uses a 50Ω
SMA connector on the evaluation board for convenient
connection to test equipment.
Features
o +2.7V to +3.3V Single-Supply Operation
o 50Ω SMA RF Input Port Connector
o Fully Assembled and Tested
Ordering Information
PART
TEMP RANGE
IC PACKAGE
MAX2204EVKIT+
-40°C to +85°C
5 SC70
+Denotes a lead-free and RoHS-compliant EV kit.
Component List
DESIGNATION
C1
C2
C3
C4
J1, J2
QTY
DESCRIPTION
1 ^{220pF ±10% capacitor (0402)}
Murata GRM155R71H221K
1 ^{27pF ±5% capacitor (0402)}
Murata GRM155R71H270J
1 ^{22µF ±10% capacitor (1206)}
Murata GRM31CR60J226K
1 ^{2200pF ±10% capacitor (0402)}
Murata GRM155R71H222K
2
Inline headers
Sullins PEC36SAAN
SMA end-launch jack receptacle,
J4
1 0.062in
Johnson 142-0701-801
JP1
1
2-pin jumper block, single
Digi-Key S1012-36-ND
JP3
1
Test point, PC mini, red
Keystone 5000
R1
1 50Ω ±5% resistor (0402)
R2
1 0Ω ±5% resistor (0402)
U1
1 MAX2204EXK+ RF Power Detector
—
1 PCB: MAX2204 Evaluation Kit+
Quick Start
Test Equipment Required
This section lists the recommended test equipment to
verify operation of the MAX2204. It is intended as a
guide only, and some substitutions are possible:
• One RF signal generator capable of delivering at
least +5dBm of output power at the operating
frequency (HPE4433B or equivalent)
• One RF power sensor capable of handling at least
+10dBm of output power at the operating frequen-
cy (HP 8482A or equivalent)
• One RF power meter capable of measuring up to
+10dBm of output power at the operating frequen-
cy (HP 437B or equivalent)
• An RF spectrum analyzer that covers the MAX2204
operating frequency range (e.g., FSEB20)
• A power supply capable of up to 10mA at +2.7V to
+3.3V
• A digital multimeter (DMM) for measuring output
voltage, supply current, and output current
• 50Ω SMA cables
• A network analyzer (e.g., HP 8753D) to measure
input impedance (optional)
Component Suppliers
SUPPLIER
PHONE
WEBSITE
Johnson Components
507-833-8822
www.johnsoncomponents.com
Murata Mfg. Co., Ltd.
770-436-1300
www.murata.com
Note: Indicate that you are using the MAX2204 when contacting these component suppliers.
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.