MAX2160 Datasheet, PDF (1/25 Pages) Maxim Integrated Products – ISDB-T Single-Segment Low-IF Tuners

19-0068; Rev 3; 12/05
EVAALVUAAILTAIOBNLEKIT
ISDB-T Single-Segment Low-IF Tuners
General Description
The MAX2160/EBG tuner ICs are designed for use in
Japanese mobile digital TV (ISDB-T single-segment)
applications. The devices directly convert UHF band
signals to a low-IF using a broadband I/Q downconvert-
er. The operating frequency range extends from
470MHz to 770MHz.
The MAX2160/EBG support both I/Q low-IF interfaces
as well as single low-IF interfaces, making the devices
universal tuners for various digital demodulator IC
implementations.
The MAX2160/EBG include an LNA, RF variable-gain
amplifiers, I and Q downconverting mixers, low-IF variable-
gain amplifiers, and bandpass filters providing in excess of
42dB of image rejection. The parts are capable of operat-
ing with either high-side or low-side local oscillator (LO)
injection. The MAX2160/EBG’s variable-gain amplifiers pro-
vide in excess of 100dB of gain-control range.
The MAX2160/EBG also include fully monolithic VCOs
and tank circuits, as well as a complete frequency syn-
thesizer. The devices include a XTAL oscillator as well
as a separate TCXO input buffer. The devices operate
with XTAL/TCXO oscillators from 13MHz to 26MHz
allowing the shared use of a VC-TCXO in cellular hand-
set applications. Additionally, a divider is provided for
the XTAL/TCXO oscillator allowing for simple and low-
cost interfacing to various channel decoders.
The MAX2160/EBG are specified for operation from
-40°C to +85°C and available in a 40-pin thin QFN lead-
free plastic package with exposed paddle (EP), and in
a lead-free wafer-level package (WLP).
Applications
Cell Phone Mobile TVs
Personal Digital Assistants (PDAs)
Pocket TVs
Ordering Information
PART
TEMP RANGE PIN-PACKAGE
PKG
CODE
MAX2160ETL
-40°C to +85°C
40 Thin QFN-EP**
(6mm x 6mm)
T4066-2
MAX2160ETL+
-40°C to +85°C
40 Thin QFN-EP**
(6mm x 6mm)
T4066-2
MAX2160EBG+ -40°C to +85°C
+Denotes lead-free package.
**EP = Exposed paddle.
W LP
(3.175mm x
3.175mm)
B08133+1
Features
♦ Low Noise Figure: < 4dB Typical
♦ High Dynamic Range: -98dBm to 0dBm
♦ High-Side or Low-Side LO Injection
♦ Integrated VCO and Tank Circuits
♦ Low LO Phase Noise: Typical -88dBc/Hz at 10kHz
♦ Integrated Frequency Synthesizer
♦ Integrated Bandpass Filters
♦ 52dB Typical Image Rejection
♦ Single +2.7V to +3.3V Supply Voltage
♦ Three Low-Power Modes
♦ Two-Wire, I²C*-Compatible Serial Control Interface
♦ Very Small Lead-Free WLP Package
Pin Configurations/
Functional Diagrams
TOP VIEW
40 39 38 37 36 35 34 33 32 31
N.C. 1
TCXO 2
FREQUENCY
SYNTHESIZER
30 N.C.
TANK
29 VCCBB
XTAL 3
DIV4
28 N.C.
GNDXTAL 4
VCCXTAL 5
÷
27 QOUT
26 GNDBB
XTALOUT 6
25 _IOUT
VCCDIG 7
SDA 8
SCL 9
MAX2160
PWRDET
EP
24 N.C.
23 GC2
22 ENTCXO
LTC 10
21 N.C.
11 12 13 14 15 16 17 18 19 20
TQFN
Pin Configurations/Functional Diagrams continued at end of
data sheet.
*Purchase of I²C components from Maxim Integrated Products
Inc., or one of its sublicensed Associated Companies, conveys
a license under the Philips I²C Patent Rights to use these com-
ponents in an I²C system, provided that the system conforms
to the I²C Standard Specification as defined by Philips.
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.