MAX2118EVKIT Datasheet, PDF (1/7 Pages) Maxim Integrated Products – MAX2116 Evaluation Kits

19-2509; Rev 0; 7/02
MAX2116/MAX2118 Evaluation Kits
General Description
The MAX2116/MAX2118 evaluation kits (EV kits) simpli-
fy evaluation of the MAX2116/MAX2118 complete DBS
direct-conversion tuner ICs. They enable testing of the
devices’ performance and require no additional support
circuitry. The EV kits’ signal inputs and outputs use
SMA and F-type connectors to facilitate the connection
of RF/cable test equipment.
Features
o Easy Evaluation of the MAX2116/MAX2118
o 4.75V to 5.25V Single-Supply Operation
o Jumpers for Digital Power Control
o All Critical Peripheral Components Included
o PC Control Software
(Available at www.maxim-ic.com)
Ordering Information
PART
MAX2116EVKIT
MAX2118EVKIT
TEMP RANGE
0^oC to +85^oC
0^oC to +85^oC
IC PACKAGE
40 QFN
40 QFN
Component List
DESIGNATION
C4, C6
QTY
DESCRIPTION
2
22pF ±5% capacitors
Murata GRP1555C1H220J
C7, C26, C27
3 Open
C8
C9, C10
C11, C12, C14,
C15, C21, C28,
C30
C13, C18
C16
C17, C22
C19
C20
C23, C25
C24
C29
1 ^{1000pF capacitor}
Murata GRP155R71H102K
2 ^{0.1µF ±10% capacitors}
Murata GRP155R61A104K
7
1000pF ±10% capacitors
Murata GRM188R71H102K
2
0.01µF ±10% capacitors
Murata GRM188R71H103K
1
100µF ±5% capacitor
Panasonic EEVHA0J101WR
2
0.22µF ±10% capacitors
Murata GRM188R71A224K
1
0.1µF ±10% capacitor
Murata GRM188R71C104K
1
3300pF ±10% capacitor
Murata GRM188R71H332K
2 ^{330pF ±5% capacitors}
Murata GRM188R71H331K
1 ^{39pF ±5% capacitor}
Murata GRM1885C1H390J
1 ^{10µF ±10% capacitor}
AVX TAJC106K016
DESIGNATION
C32, C33
J1, J3
J2, J4, J8
J5
J6, J7
J10
JP1
QTY
DESCRIPTION
2 ^{100pF ±5% capacitors}
Murata GRM1885C1H101J
SMA connectors, edge mount,
2 round contact
EFJohnson 142-0701-801
3 Open
1 ^{RF connector}
Mouser ME161-5371
2 ^{Test points}
Digi-Key 5000K-ND
DB25 connector, right angle, male
1 AMP 747238-4
Digi-Key A2098
1 ^{2-pin header}
Digi-Key S9000-ND
R1, R3, R20, R23 4 1kΩ ±1% resistors
R2, R4
R5
R6
2 ^{1kΩ ±1% resistors (MAX2118),}
open (MAX2116)
If J5 is 50Ω SMA connector,
1
use 86.6Ω ±1% resistor;
if J5 is 75Ω F-connector,
leave open
If J5 is 50Ω SMA connector,
1
use 43.2Ω ±1% resistor;
if J5 is 75Ω F-connector,
use 0Ω ±1% resistor
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642,or visit Maxim’s website at www.maxim-ic.com.