MAX205CPG-G36 Datasheet, PDF (1/23 Pages) Maxim Integrated Products – +5V, RS-232 Transceivers with 0.1muF External Capacitors

AVAILABLE
MAX200–MAX209/
MAX211/MAX213
+5V, RS-232 Transceivers
with 0.1µF External Capacitors
General Description
The MAX200–MAX209/MAX211/MAX213 transceivers
are designed for RS-232 and V.28 communication inter-
faces where Q12V supplies are not available. On-board
charge pumps convert the +5V input to the Q10V needed
for RS-232 output levels. The MAX201 and MAX209
operate from +5V and +12V, respectively, and contain a
+12V to -12V charge-pump voltage converter.
The MAX200–MAX209/MAX211/MAX213 drivers and
receivers meet all EIA/TIA-232E and CCITT V.28 speci-
fications at a 20kbps data rate. The drivers maintain the
Q5V EIA/TIA-232E output signal levels at data rates in
excess of 120kbps when loaded in accordance with the
EIA/TIA-232E specification.
The 5FW shutdown mode of the MAX200, MAX205,
MAX206, and MAX211 conserves energy in battery-pow-
ered systems. The MAX213 has an active-low shutdown
and an active-high receiver enable control. Two receiv-
ers of the MAX213 are active, allowing the ring indicator
(RI) to be monitored easily using only 75FW power.
The MAX211 and MAX213 are available in a 28-pin, wide
small-outline (SO) package and a 28-pin shrink small-
outline (SSOP) package, which occupies only 40% of the
area of the SO. The MAX207 is now available in a 24-pin
SO package and a 24-pin SSOP. The MAX203 and
MAX205 use no external components and are recom-
mended for applications with limited circuit board space.
Ordering Information ap_Fp_uea_nrs_cat_te_iond_no_af d_lat_Da s_iahe_get_r. _ams
Next-Generation Device Features
S For Low-Cost Applications:
MAX221E: ±15kV ESD-Protected, +5V, 1µA,
Single RS-232 Transceiver with AutoShutdown™
S For Low-Voltage and Space-Constrained Applications:
MAX3222E/MAX3232E/MAX3237E/MAX3241E/
MAX3246E: ±15kV ESD-Protected, Down
to 10nA, +3.0V to +5.5V, Up to 1Mbps, True
RS-232 Transceivers (MAX3246E Available in
UCSP™ Package)
S For Space-Constrained Applications:
MAX3228E/MAX3229E: ±15kV ESD-Protected,
+2.5V to +5.5V, RS-232 Transceivers in UCSP
S For Low-Voltage or Data Cable Applications:
MAX3380E/MAX3381E: +2.35V to +5.5V, 1µA,
2Tx/2Rx RS-232 Transceivers with ±15kV ESD-
Protected I/O and Logic Pins
S For Low-Power Applications:
MAX3224E–MAX3227E/MAX3244E/MAX3245E:
±15kV ESD-Protected, 1µA, 1Mbps,
+3.0V to +5.5V, RS-232 Transceivers with
AutoShutdown Plus™
Applications
Computers: Laptops, Palmtops, Notebooks
Battery-Powered Equipment
Handheld Equipment
Selector Guide
PART
POWER-SUPPLY
VOLTAGE (V)
NUMBER
OF RS-232
DRIVERS
NUMBER
OF RS-232
RECEIVERS
NUMBER OF
RECEIVERS
ACTIVE IN
SHUTDOWN
NUMBER OF
EXTERNAL
CAPACITORS
(0.1μF)
MAX200
+5
5
0
0
4
MAX201 +5 and +9.0 to +13.2
2
2
0
2
MAX202
+5
2
2
0
4
MAX203
+5
2
2
0
None
MAX204
+5
4
0
0
4
MAX205
+5
5
5
0
None
MAX206
+5
4
3
0
4
MAX207
+5
5
3
0
4
MAX208
+5
4
4
0
4
MAX209 +5 and +9.0 to +13.2
3
5
0
2
Pin_MC_Ao_Xnf₂i₁g₁urations appea₊r ₅at end of data sheet₄.
5
0
4
Functional Diagrams continued at end of data sheet.
MAX213
+5
4
5
2
4
UCSP is a trademark of Maxim Integrated Products, Inc.
AutoShutdown, AutoShutdown Plus, and UCSP are trademarks of Maxim Integrated Products, Inc.
For pricing, delivery, and ordering information, please contact Maxim Direct
at 1-888-629-4642, or visit Maxim’s website at www.maximintegrated.com.
LOW-POWER
SHUTDOWN/TTL
THREE-STATE
Yes/No
No/No
No/No
No/No
No/No
Yes/Yes
Yes/Yes
No/No
No/No
No/Yes
Yes/Yes
Yes/Yes
19-0065; Rev 7; 12/05