MAX2043_1 Datasheet, PDF (1/7 Pages) Maxim Integrated Products – Evaluation Kit

19-0570; Rev 0; 5/06
MAX2043 Evaluation Kit
General Description
The MAX2043 evaluation kit (EV kit) simplifies the evalu-
ation of the MAX2043 UMTS/WCDMA, DCS, PCS, and
WiMAX base-station up/downconversion mixer. It is fully
assembled and tested at the factory. Standard 50Ω
SMA connectors are included on the EV kit’s input and
output ports to allow quick and easy evaluation on the
test bench.
This document provides a list of test equipment required
to evaluate the device, a straight-forward test procedure
to verify functionality, a description of the EV kit circuit,
the circuit schematic, a bill of materials (BOM) for the kit,
and artwork for each layer of the PC board.
Features
o Fully Assembled and Tested
o 50Ω SMA Connectors on Input and Output Ports
o 1700MHz to 3000MHz RF Frequency Range
o 1900MHz to 3000MHz LO Frequency Range
o DC to 350MHz IF Frequency Range
o 7.5dB Conversion Loss
o +31dBm Input IP3 (Downconversion)
o +23dBm Input 1dB Compression Point
o 7.8dB Noise Figure
o Integrated LO Buffer
o Integrated RF and LO Baluns
o Low -3dBm to +6dBm LO Drive
o Built-In SPDT LO Switch with 43dB LO1 to LO2
Isolation and 50ns Switching Time
o External Current-Setting Resistor Provides Option
for Operating Mixer in Reduced-Power/Reduced-
Performance Mode
Component Suppliers
SUPPLIER
PHONE
WEBSITE
Johnson
507-833-8822 www.johnsoncomponents.com
M/A-Com 800-366-2266 www.macom.com
Murata
770-436-1300 www.murata.com
Note: Indicate that you are using the MAX2043 when contact-
ing these component suppliers.
DESIGNATION QTY
DESCRIPTION
4pF ±0.25pF, 50V C0G ceramic
C1
1 capacitor (0402)
Murata GRM1555C1H4R0C
C2, C4, C6, C8
C3
C5, C7, C9
22pF ±5%, 50V C0G ceramic
4 capacitors (0402)
Murata GRM1555C1H220J
0 Not installed (0603)
0.01µF ±10%, 25V X7R ceramic
3 capacitors (0402)
Murata GRM155R71E103K
J1–J4
PC board edge-mount SMA RF
4 connectors (flat-tab launch)
Johnson 142-0741-856
Ordering Information
PART
TEMP RANGE
MAX2043EVKIT
-40°C to +85°C
*EP = Exposed paddle.
IC PACKAGE
36 Thin QFN-EP*
Component List
DESIGNATION QTY
DESCRIPTION
R1
1 357Ω ±1% resistor (0402)
R2
1 47kΩ ±5% resistor (0603)
T1
1
1:1 transformer (50:50)
M/A-COM MABAES0029
Large test point for 0.062in PC board
TP1
1 (red)
Mouser 151-107-RC or equivalent
Large test point for 0.062in PC board
TP2
1 (black)
Mouser 151-103-RC or equivalent
Large test point for 0.062in PC board
TP3
1 (white)
Mouser 151-101-RC or equivalent
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.