|
MAX2037_09 Datasheet, PDF (1/13 Pages) Maxim Integrated Products – Ultrasound Variable-Gain Amplifier | |||
|
19-0586; Rev 1; 2/09
Ultrasound Variable-Gain Amplifier
General Description
The MAX2037 8-channel variable-gain amplifier (VGA)
is designed for high linearity, high dynamic range, and
low-noise performance targeting ultrasound imaging
and Doppler applications. Each amplifier features dif-
ferential inputs and outputs and a total gain range of
typically 42dB. In addition, the VGAs offer very low out-
put-referred noise performance suitable for interfacing
with 12-bit ADCs.
The MAX2037 VGA is optimized for less than ±0.25dB
absolute gain error to ensure minimal channel-to-chan-
nel ultrasound beamforming focus error. The deviceâs
differential outputs are designed to directly drive ultra-
sound ADCs through an external passive anti-aliasing
filter. A switchable clamp is also provided at each ampli-
fierâs outputs to limit the output signals, thereby prevent-
ing ADC overdrive or saturation.
Dynamic performance of the device is optimized to
reduce distortion to support second-harmonic imaging.
The device achieves a second-harmonic distortion
specification of -70dBc at VOUT = 1.5VP-P and fIN =
5MHz, and an ultrasound-specific* two-tone third-order
intermodulation distortion specification of -52dBc at
VOUT = 1.5VP-P and fIN = 5MHz.
The MAX2037 operates from a +5.0V power supply,
consuming only 120mW/channel. The device is avail-
able in a 100-pin TQFP package with an exposed pad.
Electrical performance is guaranteed over a 0°C to
+70°C temperature range.
Applications
Ultrasound Imaging
Sonar
Functional Diagram
VCC
VREF
VG_CTL+
VG_CTL-
VG_IN1+
VG_IN1-
â¢
â¢
â¢
VG_IN8+
VG_IN8-
PD
MAX2037
-12.5dB TO +29.5dB
50Ω
VGA
50Ω
â¢â¢
â¢
â¢â¢
â¢
â¢â¢
â¢
50Ω
VGA
50Ω
BIAS
CIRCUITRY
VG_CLAMP_MODE
VG_OUT1+
VG_OUT1-
â¢
â¢
â¢
VG_OUT8+
VG_OUT8-
GND
EXT_RES
Features
⦠8-Channel Configuration
⦠High Integration for Ultrasound Imaging
Applications
⦠Pin Compatible with the MAX2038 Ultrasound
VGA Plus CW Doppler Beamformer
⦠Maximum Gain, Gain Range, and Output-Referred
Noise Optimized for Interfacing with 12-Bit ADCs
Maximum Gain of 29.5dB
Total Gain Range of 42dB
22nV/âHz Ultra-Low Output-Referred Noise at
5MHz
Pin-for-Pin 10-Bit Compatibility Supported By
MAX2035/MAX2036
⦠±0.25dB Absolute Gain Error
⦠Switchable Output VGA Clamp Eliminating ADC
Overdrive
⦠Fully Differential VGA Outputs for Direct ADC
Drive
⦠Variable Gain Range Achieves 42dB Dynamic
Range
⦠-70dBc HD2 at VOUT = 1.5VP-P and fIN = 5MHz
⦠Two-Tone Ultrasound-Specific* IMD3 of -52dBc at
VOUT = 1.5VP-P and fIN = 5MHz
⦠120mW Consumption Per Channel
*See the Ultrasound-Specific IMD3 Specification in the
Applications Information section.
Ordering Information
PART
TEMP
RANGE
PIN-PACKAGE
MAX2037CCQ+D
0°C to +70°C
100 TQFP-EPâ
MAX2037CCQ+TD
0°C to +70°C
100 TQFP-EPâ
â EP = Exposed pad.
+Denotes a lead(Pb)-free/RoHS-compliant package.
T = Tape and reel.
D = Dry packing.
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maximâs website at www.maxim-ic.com.
|
▷ |