|
MAX2023_1 Datasheet, PDF (1/8 Pages) Maxim Integrated Products – Evaluation Kit | |||
|
19-0748; Rev 0; 2/07
MAX2023 Evaluation Kit
General Description
The MAX2023 evaluation kit (EV kit) simplifies the evalu-
ation of the MAX2023 direct upconversion (downconver-
sion) quadrature modulator (demodulator) designed for
single and multicarrier 1500MHz to 2300MHz
GSM/EDGE, cdma2000®, and WCDMA and base-sta-
tion applications. It is fully assembled and tested at the
factory. Standard 50⦠SMA connectors are included on
the EV kitâs input and output ports to allow quick and
easy evaluation on the test bench using RF test equip-
ment. The EV kit is lead free and RoHS compliant.
This document provides a list of test equipment required
to evaluate the device, a straight-forward test procedure
to verify functionality, a description of the EV kit circuit,
the circuit schematic, a bill of materials (BOM) for the kit,
and artwork for each layer of the PCB.
cdma2000 is a registered trademark of Telecommunications
Industry Association.
DESIGNATION
C1, C6, C7,
C10, C13
QTY
5
DESCRIPTION
22pF ±5%, 50V C0G ceramic
capacitors (0402)
Murata GRM1555C1H220J
C2, C5, C8,
C11, C12
0.1µF ±10%, 16V X7R ceramic
5 capacitors (0603)
Murata GRM188R71C104K
8pF ±0.25pF, 50V C0G ceramic
C3
1 capacitor (0402)
Murata GRM1555C1H8ROC
C9
C14âC25
J1âJ6
2pF ±0.1pF, 50V C0G ceramic
1 capacitor (0402)
Murata GRM1555C1H2ROB
0 Not installed
PCB edge-mounted SMA RF
6
connectors
(flat-tab launch)
Johnson 142-0741-856
J7, J8
L1âL4
R1
2
Headers 1 x 3 (0.100 spacing
0.062in thick board)
0 Not installed
1
432⦠±1% resistor (0402)
Any
Features
o Fully Assembled and Tested
o 50⦠SMA Connectors on Input and Output Ports
o 1500MHz to 2300MHz RF Range
o High-Linearity and Low-Noise Performance
o Broadband Baseband Input/Output
o DC-Coupled Input Provides for Direct DAC/ADC
Interface
o Lead Free and RoHS Compliant
Ordering Information
PART
TEMP RANGE IC PACKAGE
MAX2023EVKIT+
-40°C to +85°C 36 QFN-EP*
+Denotes a lead-free and RoHS-compliant EV kit.
*EP = Exposed paddle.
Component List
DESIGNATION
R2
R3
R4âR11
TP1
TP2
TP3, TP4
U1
QTY
1
1
0
1
1
2
1
DESCRIPTION
562⦠±1% resistor (0402)
Any
301⦠±1% resistor (0402)
Any
Not installed
Large test point for 0.062in PCB
(red)
Mouser 151-107-RC
Large test point for 0.062in PCB
(black)
Mouser 151-103-RC
Large test point for 0.062in PCB
(white)
Mouser 151-101-RC
Mod/Demod IC (6mm x 6mm,
36-pin QFN exposed paddle)
Maxim MAX2023ETX+
Note: U1 has an exposed paddle
conductor that requires it to be
solder attached to a grounded
pad on the circuit board to
ensure a proper
electrical/thermal design.
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maximâs website at www.maxim-ic.com.
|
▷ |