MAX2016_1 Datasheet, PDF (1/9 Pages) Maxim Integrated Products – Evaluation Kit

19-3453; Rev 1; 12/06
MAX2016 Evaluation Kit
General Description
The MAX2016 evaluation kit (EV kit) is a fully assembled
and tested surface-mount PCB that allows for easy
evaluation of the MAX2016 dual logarithmic
detector/controller. The MAX2016 EV kit includes con-
nections to operate the device as a detector or as a
controller. The RF inputs utilize 50Ω SMA connectors
for convenient connections to test equipment.
Component Suppliers
SUPPLIER
AVX Corp.
Murata Mfg. Co., Ltd.
PHONE
803-946-0690
770-436-1300
WEBSITE
www.avx.com
www.murata.com
Note: Indicate that you are using the MAX2016 when contact-
ing these component suppliers.
Features
♦ Complete Gain and VSWR Detector/Controller
♦ Dual-Channel RF Power Detector/Controller
♦ Low Frequency to 2.5GHz Frequency Range
♦ Exceptional Accuracy Over Temperature
♦ High 80dB Dynamic Range
♦ 2.7V to 5.25V* Supply Voltage Range
♦ Internal 2V Reference
♦ Scaling Stable Over Supply and Temperature
Variations
♦ Controller Mode with Error Output
♦ Available in 5mm x 5mm, 28-Pin Thin QFN
Package
*See the Power-Supply Connection section.
Ordering Information
PART
TEMP RANGE
MAX2016EVKIT
-40°C to +85°C
**EP = Exposed paddle.
PIN-PACKAGE
28 Thin QFN-EP**
Component List
DESIGNATION
C1, C2, C8, C9
C3, C6, C10,
C13
C4, C7, C11,
C14
C5, C12, C15
QTY
4
4
4
0
DESCRIPTION
680pF ±5%, 50V C0G ceramic
capacitors (0402)
Murata GRP1555C1H681J
33pF ±5%, 50V C0G ceramic
capacitors (0402)
Murata GRP1555C1H330J
0.1µF ±10%, 16V X7R ceramic
capacitors (0603)
Murata GRM188R71C104K
Not installed, capacitors (0603)
C16, C17
C18
J1, J2
0 Not installed, capacitors (0402)
10µF ±10%, 16V tantalum capacitor
1 (C case)
AVX TAJC106K016R
PCB edge-mount SMA RF
2 connectors (flat-tab launch)
Johnson 142-0741-856
†_{The exposed paddle conductor on U1 must be solder-attached}
to a grounded pad on the PCB to ensure a proper electrical/ther-
mal design.
DESIGNATION QTY
DESCRIPTION
R1–R5
5
0Ω resistors (0402)
Any
R6
1
0Ω resistor (1206)
Any
R7–R10
TP1
TP2, TP4, TP9
TP3, TP5–TP8,
TP10
TP11, TP12,
TP13
U1
—
0 Not installed, resistors
Large test point for 0.062in PCB
1 (red)
Mouser 151-107 or equivalent
Large test points for 0.062in PC
3 board (black)
Mouser 151-103 or equivalent
Large test points for 0.062in PC
6 board (white)
Mouser 151-101 or equivalent
0 Not installed, test points
1 MAX2016ETI^†
1 PCB: MAX2016EVKIT
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.