|
MAX20002 Datasheet, PDF (1/18 Pages) Maxim Integrated Products – Integrated Step-Down Converters | |||
|
MAX20002/MAX20003
EVALUATION KIT AVAILABLE
36V, 220kHz to 2.2MHz, 2A/3A Fully
Integrated Step-Down Converters
with 15μA Operating Current
General Description
The MAX20002/MAX20003 are small, synchronous
buck converters with integrated high-side and low-side
MOSFETs. Each device is designed to deliver up to 2A/3A
with input voltages from 3.5V to 36V, while using only
15µA quiescent current at no load. Voltage quality can be
monitored by observing the PGOOD signal. The devices
can operate in dropout by running at 98% duty cycle,
making them ideal for automotive applications.
The devices offer fixed output voltages of 5V/3.3V, along
with the ability to program the output voltage between 1V
to 10V. Frequency can be programmed using a resistor
to ground on the FOSC pin from 220kHz to 2.2MHz. The
devices offer a forced fixed-frequency mode and skip
mode with ultra-low quiescent current of 15µA. They have
a pin that can be programmed to turn on/off the spread
spectrum, further helping systems designers with better
EMC management.
The MAX20002/MAX20003 are available in a small 5mm x
5mm 20-pin TQFN package with exposed pad and use very
few external components.
Applications
ââ Point-of-Load Applications in Automotive
ââ Distributed DC Power Systems
ââ Navigation and Radio Head Units
Benefits and Features
ââ Operating VIN Range of 3.5V to 36V
ââ 42V Load-Dump Protection
ââ 15µA Quiescent Current When in Standby Mode
ââ Synchronous DC-DC Converter with Integrated FETs
⢠MAX20002 = 2A
⢠MAX20003 = 3A
ââ 220kHz to 2.2MHz Adjustable Frequency
ââ Spread-Spectrum Control with a Pin
ââ Short-Circuit, Thermal Protections
ââ Fixed 8ms Internal Soft-Start
ââ Programmable 1V to 10V Output for the Buck or
Fixed 5V/3.3V Options Available
ââ 99% Duty-Cycle Operation with Low Dropout
ââ Fixed Output Voltage with ±2% Output Accuracy
(5V/3.3V) or Externally Resistor Adjustable (1V to 10V)
with ±1% FB Accuracy
ââ PGOOD Output and High-Voltage EN Input
ââ -40°C to +125°C Automotive Temperature Range
ââ AEC-Q100 Qualified
For related parts and recommended products to use with this part, refer
to www.maximintegrated.com/MAX20002.related.
Ordering Information appears at end of data sheet.
19-7311; Rev 1; 5/14
|
▷ |