MAX17600 Datasheet, PDF (1/12 Pages) Maxim Integrated Products – 4A Sink /Source Current, 12ns, Dual MOSFET Drivers

19-6177; Rev 1; 5/12
EVALUATION KIT AVAILABLE
MAX17600–MAX17605
4A Sink /Source Current, 12ns, Dual MOSFET Drivers
General Description
The MAX17600–MAX17605 devices are high-speed
MOSFET drivers capable of sinking /sourcing 4A peak
currents. The devices have various inverting and non-
inverting part options that provide greater flexibility in
controlling the MOSFET. The devices have internal logic
circuitry that prevents shoot-through during output-state
changes. The logic inputs are protected against voltage
spikes up to +14V, regardless of VDD voltage. Propagation
delay time is minimized and matched between the dual
channels. The devices have very fast switching time,
combined with short propagation delays (12ns typ),
making them ideal for high-frequency circuits. The
devices operate from a +4V to +14V single power
supply and typically consume 1mA of supply cur-
rent. The MAX17600/MAX17601 have standard TTL
input logic levels, while the MAX17603 /MAX17604/
MAX17605 have CMOS-like high-noise margin (HNM)
input logic levels. The MAX17600/MAX17603 are dual
inverting input drivers, the MAX17601/MAX17604 are
dual noninverting input drivers, and the MAX17602 /
MAX17605 devices have one noninverting and one
inverting input. These devices are provided with enable
pins (ENA, ENB) for better control of driver operation.
These devices are available in 8-pin (3mm x 3mm) TDFN,
8-pin (3mm x 5mm) FMAX^®, and 8-pin SO packages and
operate over the -40NC to +125NC temperature range.
Applications
Power MOSFET Switching
Switch-Mode Power Supplies
DC-DC Converters
Motor Control
Power-Supply Modules
Features
S Dual Drivers with Enable Inputs
S +4V to +14V Single Power-Supply Range
S 4A Peak Sink /Source Current
S Inputs Rated to +14V, Regardless of V_DD Voltage
S Low 12ns Propagation Delay
S 6ns Typical Rise and 5ns Typical Fall Times with
1nF Load
S Matched Delays Between Channels
S Parallel Operation of Dual Outputs for Larger
Driver Output Current
S TTL or HNM Logic-Level Inputs with Hysteresis for
Noise Immunity
S Low Input Capacitance: 10pF (typ)
S Thermal Shutdown Protection
S TDFN, µMAX, and SO Package Options
S -40NC to +125NC Operating Temperature Range
Typical Operating Circuit
ENA
VDD
(UP TO +14V) _VDD
MAX17600 ^OUTA
MAX17601
MAX17602 _ENB
MAX17603
MAX17604
INA
MAX17605
OUTB
INB
GND
Ordering Information appears at end of data sheet.
µMAX is a registered trademark of Maxim Integrated
Products, Inc.
For pricing, delivery, and ordering information, please contact Maxim Direct
  1
at 1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.