|
MAX17502_13 Datasheet, PDF (1/21 Pages) Maxim Integrated Products – 60V, 1A, Ultra-Small, High-Efficiency, Synchronous Step-Down DC-DC Converter | |||
|
MAX17502
60V, 1A, Ultra-Small, High-Efficiency,
Synchronous Step-Down DC-DC Converter
General Description
The MAX17502 high-efficiency, high-voltage, synchroÂnous
step-down DC-DC converter with integrated MOSFETs
operates over a 4.5V to 60V input voltage range. It deliv-
ers output currents up to 1A at output voltages of 0.9V to
92%VIN. The output voltage is accurate to within ±1.7%
over -40°C to +125°C. The MAX17502 is available in
compact TDFN and TSSOP packages. Simulation models
are available.
The device features peak-current-mode control with
pulse-width modulation (PWM) and operates with fixed
switching frequency at any load. The low-resistance,
on-chip MOSFETs ensure high efficiency at full load and
simplify the layout.
A programmable soft-start feature allows users to reduce
input inrush current. The device also incorporates an
output enable/undervoltage lockout pin (EN/UVLO) that
allows the user to turn on the part at the desired input-
voltage level. An open-drain RESET pin provides a
delayed power-good signal to the system upon achieving
successful regulation of the output voltage.
Applications
â Industrial Process Control
â HVAC and Building Control
â Base Station, VOIP, Telecom
â Home Theatre
â Automotive
â Battery-Powered Equipment
â General-Purpose Point-of-Load
Benefits and Features
â Eliminates External Components and Reduce Total
Cost
⢠No Schottky-Synchronous Operation for High
Efficiency and Reduced Cost
⢠Internal Compensation and Feedback Divider for
3.3V and 5V Outputs
⢠All-Ceramic Capacitors, Ultra-Compact Layout
â Reduces Number of DC-DC Regulators to Stock
⢠Wide 4.5V to 60V Input Voltage Range
⢠0.9V to 92%VIN Output Voltage
⢠Delivers up to 1A
⢠600kHz and 300kHz Switching Frequency Options
⢠Available in a 10-Pin, 3mm x 2mm TDFN and
14-Pin, 5mm x 4.4mm TSSOP Packages
â Reduces Power Dissipation
⢠Peak Efficiency > 90%
⢠Shutdown Current = 0.9μA (typ)
â Operates Reliably in Adverse Industrial Environments
⢠Hiccup-Mode Current Limit, Sink Current Limit,
and Autoretry Startup
⢠Built-In Output-Voltage Monitoring (Open-Drain
RESET Pin)
⢠Resistor-Programmable EN/UVLO Threshold
⢠Adjustable Soft-Start and Prebiased Power-Up
⢠-40°C to +125°C Industrial Temperature Range
Ordering Information appears at end of data sheet.
For related parts and recommended products to use with this part, refer
to www.maximintegrated.com/MAX17502.related.
19-6245 Rev 1; 11/12
|
▷ |