English
Language : 

MAX17409 Datasheet, PDF (1/32 Pages) Maxim Integrated Products – 1-Phase Quick-PWM GPU Controller
19-4590; Rev 1; 7/09
EVAALVUAAILTAIOBNLEKIT
1-Phase Quick-PWM GPU Controller
General Description
The MAX17409 is a 1-phase Quick-PWM™ step-down
VID power-supply controller for high-performance graph-
ics processors. The Quick-PWM control provides instan-
taneous response to fast-load current steps. Active
voltage positioning reduces power dissipation and bulk
output capacitance requirements and allows ideal posi-
tioning compensation for tantalum, polymer, or ceramic
bulk output capacitors.
The MAX17409 is intended for two different notebook
processor core applications: either bucking down the bat-
tery directly to create the core voltage, or bucking down
the +5V system supply. The single-stage conversion
method allows this device to directly step down high-volt-
age batteries for the highest possible efficiency.
Alternatively, 2-stage conversion (stepping down the +5V
system supply instead of the battery) at higher switching
frequency provides the minimum possible physical size.
A slew-rate controller allows controlled transitions
between VID codes. A thermistor-based temperature
sensor provides programmable thermal protection.
The MAX17409 is available in a 28-pin, 4mm x 4mm
TQFN package.
Applications
Graphics Core (GPU) Power Supplies
Voltage-Positioned Step-Down Converters
2-to-4 Li+ Cells Battery to Processor Core
Supply Converters
Notebooks/Desktops/Servers
Features
o 1-Phase Quick-PWM Controller
o ±6mV VOUT Accuracy Over Line, Load, and
Temperature
o 6-Bit Graphics DAC (12.5mV LSB)
o Active Voltage Positioning with Adjustable Gain
o Accurate Droop and Current Limit
o Remote Output and Ground Sense
o Buffered 2V Reference Output for Offsets
o Power-Good Window Comparator
o Temperature Comparator
o Drives Large Synchronous Rectifier FETs
o 2V to 26V Power Input Range
o Adjustable Switching Frequency (600kHz max)
o Output Overvoltage and Undervoltage Protection
o Soft-Startup and Soft-Shutdown
o Internal Boost Diodes
Ordering Information
PART
TEMP RANGE
PIN-PACKAGE
MAX17409GTI+
-40°C to +105°C
28 TQFN-EP*
+Denotes a lead(Pb)-free/RoHS-compliant package.
*EP = Exposed pad.
Pin Configuration
TOP VIEW
21 20 19 18 17 16 15
DH 22
GND 23
VRHOT 24
REF 25
ILIM 26
VCC 27
CCV 28
MAX17409
PAD
GND
14 G3
13 G2
12 G1
11 G0
10 SHDN
9 PWRGD
8 TON
1 234567
THIN QFN
Quick-PWM is a trademark of Maxim Integrated Products, Inc.
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.