MAX1717 Datasheet, PDF (1/32 Pages) Maxim Integrated Products – Dynamically Adjustable, Synchronous Step-Down Controller for Notebook CPUs

19-1636; Rev 0; 1/00
EVAALVUAAILTAIOBNLEKIT _{Dynamically Adjustable, Synchronous}
Step-Down Controller for Notebook CPUs
General Description
The MAX1717 step-down controller is intended for core
CPU DC-DC converters in notebook computers. It fea-
tures a dynamically adjustable output, ultra-fast tran-
sient response, high DC accuracy, and high efficiency
needed for leading-edge CPU core power supplies.
Maxim’s proprietary Quick-PWM™ quick-response,
constant-on-time PWM control scheme handles wide
input/output voltage ratios with ease and provides
100ns “instant-on” response to load transients while
maintaining a relatively constant switching frequency.
The output voltage can be dynamically adjusted
through the 5-bit digital-to-analog converter (DAC)
inputs over a 0.925V to 2V range. A unique feature of
the MAX1717 is an internal multiplexer (mux) that
accepts two 5-bit DAC settings with only five digital
input pins. Output voltage transitions are accomplished
with a proprietary precision slew-rate control^† that mini-
mizes surge currents to and from the battery while
guaranteeing “just-in-time” arrival at the new DAC setting.
High DC precision is enhanced by a two-wire remote-
sensing scheme that compensates for voltage drops in
the ground bus and output voltage rail. Alternatively,
the remote-sensing inputs can be used together with
the MAX1717’s high DC accuracy to implement a volt-
age-positioned circuit that modifies the load-transient
response to reduce output capacitor requirements and
full-load power dissipation.
Single-stage buck conversion allows these devices to
directly step down high-voltage batteries for the highest
possible efficiency. Alternatively, two-stage conversion
(stepping down the +5V system supply instead of the
battery) at a higher switching frequency allows the mini-
mum possible physical size.
The MAX1717 is available in a 24-pin QSOP package.
Applications
Notebook Computers with SpeedStep™ or Other
Dynamically Adjustable Processors
2-Cell to 4-Cell Li+ Battery to CPU Core Supply
Converters
5V to CPU Core Supply Converters
Pin Configuration appears at end of data sheet.
†_{Patent pending.}
Quick-PWM is a trademark of Maxim Integrated Products.
SpeedStep is a trademark of Intel Corp.
Features
o Quick-PWM Architecture
o ±1% V_OUT Accuracy Over Line and Load
o 5-Bit On-Board DAC with Input Mux
o Precision-Adjustable V_OUT Slew Control
o 0.925V to 2V Output Adjust Range
o Supports Voltage-Positioned Applications
o 2V to 28V Battery Input Range
o Requires a Separate +5V Bias Supply
o 200/300/550/1000kHz Switching Frequency
o Over/Undervoltage Protection
o Drives Large Synchronous-Rectifier FETs
o 700µA typ I_CC Supply Current
o 2µA typ Shutdown Supply Current
o 2V ±1% Reference Output
o VGATE Transition-Complete Indicator
o Small 24-Pin QSOP Package
PART
MAX1717EEG
Ordering Information
TEMP. RANGE
-40°C to +85°C
PIN-PACKAGE
24 QSOP
Minimal Operating Circuit
+5V INPUT
MAX1717
BATTERY
2.5V TO 28V
DAC
INPUTS
V_CC
V_DD
SKP/SDN
V+
FBS
ILIM
BST
DH
GNDS
A/B
REF
TON
LX
CC
DL
D0
GND
D1
D2
FB
D3
TIME
D4
VGATE
OUTPUT
0.925V TO 2V
________________________________________________________________ Maxim Integrated Products 1
For free samples and the latest literature, visit www.maxim-ic.com or phone [phone].
For small orders, phone [phone].