MAX17043_12 Datasheet, PDF (1/14 Pages) Maxim Integrated Products – Compact, Low-Cost 1S/2S Fuel Gauges with Low-Battery Alert

19-4811; Rev 5; 6/12
EVAALVUAAILTAIOBNLEKIT
Compact, Low-Cost 1S/2S Fuel Gauges
with Low-Battery Alert
General Description
The MAX17043/MAX17044 are ultra-compact, low-cost,
host-side fuel-gauge systems for lithium-ion (Li+) batter-
ies in handheld and portable equipment. The MAX17043
is configured to operate with a single lithium cell and the
MAX17044 is configured for a dual-cell 2S pack.
The MAX17043/MAX17044 use a sophisticated Li+ bat-
tery-modeling scheme, called ModelGauge™ to track
the battery’s relative state-of-charge (SOC) continuously
over a widely varying charge/discharge profile. Unlike
traditional fuel gauges, the ModelGauge algorithm elim-
inates the need for battery relearn cycles and an exter-
nal current-sense resistor. Temperature compensation
is possible in the application with minimal interaction
between a µC and the device.
A quick-start mode provides a good initial estimate of
the battery’s SOC. This feature allows the IC to be
located on system side, reducing cost and supply
chain constraints on the battery. Measurement and esti-
mated capacity data sets are accessed through an I²C
interface. The MAX17043/MAX17044 are available in
either a 0.4mm pitch 9-bump UCSP™ or 2mm x 3mm,
8-pin TDFN lead-free package.
Applications
Smartphones
MP3 Players
Digital Still Cameras
Digital Video Cameras
Portable DVD Players
GPS Systems
Handheld and Portable
Applications
ModelGauge is a trademark of Maxim Integrated Products, Inc.
UCSP is a trademark of Maxim Integrated Products, Inc.
Features
o Host-Side or Battery-Side Fuel Gauging
1 Cell (MAX17043)
2 Cell (MAX17044)
o Precision Voltage Measurement
±12.5mV Accuracy to 5.00V (MAX17043)
±30mV Accuracy to 10.00V (MAX17044)
o Accurate Relative Capacity (RSOC) Calculated
from ModelGauge Algorithm
o No Offset Accumulation on Measurement
o No Full-to-Empty Battery Relearning Necessary
o No Sense Resistor Required
o External Alarm/Interrupt for Low-Battery Warning
o 2-Wire Interface
o Low Power Consumption
o Tiny, Lead(Pb)-Free, 8-Pin, 2mm x 3mm TDFN
Package or Tiny 0.4mm Pitch 9-Bump UCSP
Package
Ordering Information
PART
TEMP RANGE PIN-PACKAGE
MAX17043G+U
-20°C to +70°C 8 TDFN-EP*
MAX17043G+T
-20°C to +70°C 8 TDFN-EP*
MAX17043X+
-20°C to +70°C 9 UCSP
MAX17043X+T10
-20°C to +70°C 9 UCSP
MAX17044G+U
-20°C to +70°C 8 TDFN-EP*
MAX17044G+T
-20°C to +70°C 8 TDFN-EP*
MAX17044X+
-20°C to +70°C 9 UCSP
MAX17044X+T10
-20°C to +70°C 9 UCSP
+Denotes a lead(Pb)-free/RoHS-compliant package.
T = Tape and reel.
*EP = Exposed pad.
Simplified Operating Circuit
1kΩ
Li+
PROTECTION
1µF
CIRCUIT
CELL
V_DD
ALRT
MAX17043
MAX17044
QSTRT
CTG
SDA
GND
SCL
EP
150Ω
4.7kΩ
SYSTEM
µP
INTERRUPT
I²C BUS
MASTER
10nF
For pricing, delivery, and ordering information, please contact Maxim Direct
1
at 1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.