|
MAX16832A_15 Datasheet, PDF (1/10 Pages) Maxim Integrated Products – 2MHz, High-Brightness LED Drivers with Integrated MOSFET and High-Side Current Sense | |||
|
MAX16832A/MAX16832C
EVALUATION KIT AVAILABLE
2MHz, High-Brightness LED Drivers
with Integrated MOSFET and
High-Side Current Sense
General Description
The MAX16832A/MAX16832C step-down constant-cur-
rent high-brightness LED (HB LED) drivers provide a
cost-effective design solution for automotive
interior/exterior lighting, architectural and ambient light-
ing, LED bulbs, and other LED illumination applications.
The MAX16832A/MAX16832C operate from a +6.5V to
+65V input voltage range and can provide an output
current up to 700mA, if operated up to a temperature of
+125°C, or up to a 1A if operated up to a temperature
of +105°C. A high-side current-sense resistor adjusts
the output current, and a dedicated pulse-width modu-
lation (PWM) input enables pulsed LED dimming over a
wide range of brightness levels.
These devices are well suited for applications requiring
a wide input voltage range. The high-side current sens-
ing and an integrated current-setting circuitry minimize
the number of external components while delivering an
average output current with ±3% accuracy. A hysteretic
control method ensures excellent input supply rejection
and fast response during load transients and PWM dim-
ming. The MAX16832A allows 10% current ripple, and
the MAX16832C allows 30% current ripple. Both
devices operate up to a 2MHz switching frequency,
thus allowing the use of small-sized components.
The MAX16832A/MAX16832C offer an analog dimming
feature that reduces the output current by applying an
external DC voltage below the internal 2V threshold volt-
age from TEMP_I to GND. TEMP_I also sources 25µA to
a negative temperature coefficient (NTC) thermistor con-
nected between TEMP_I and GND, thus providing an
analog thermal-foldback feature that reduces the LED
current when the temperature of the LED string exceeds
a specified temperature point. Additional features
include thermal-shutdown protection.
The MAX16832A/MAX16832C operate over the -40°C to
+125°C automotive temperature range and are available
in a thermally enhanced 8-pin SO package.
Applications
⢠Architectural, Industrial, and Ambient Lighting
⢠Automotive RCL, DRL, and Fog Lights
⢠Heads-Up Displays
⢠Indicator and Emergency Lighting
⢠PoE Powered Lighting
Benefits and Features
⢠Cost-Effective Solution for a Wide Range of LED
Lighting Applications
⢠6.5V to 65V Input Voltage Range
⢠Output Current Up to 1A
⢠±3% LED Current Accuracy
⢠Selectable Dimming Options: Linear or PWM
⢠Minimal Component Count Saves Cost and Space
⢠On-Board 65V, 0.45Ω Power MOSFET
⢠Resistor-Programmable Constant LED Current
⢠Integrated High-Side Current Sense with 200mV
Current-Sense Reference
⢠Hysteretic Control: Up to 2MHz Switching
Frequency
⢠Protection Features and Wide Operating
Temperature Range Improves Lighting Fixture
Reliability
⢠Thermal-Foldback Protection Dims LEDs to
Minimize Overheating
⢠Thermal-Shutdown Protection
⢠Available in a Thermally Enhanced 8-Pin SO Package
⢠Operation over -40°C to +125°C Temperature Range
Ordering Information and Pin Configuration appear at end
of data sheet.
Typical Application Circuit
D1
HB LEDs
VIN
RSENSE
L1
C2
1 CS
TEMP_I 8
NTC*
ON
2 IN
DIM 7
OFF
MAX16832A
C1
3
MAX16832C
GND
LX 6
4
PGND
5
LX
*OPTIONAL
19-4140; Rev 7; 2/15
|
▷ |