MAX1562 Datasheet, PDF (1/12 Pages) Maxim Integrated Products – Programmable 4A USB Current-Limited Switches with Autoreset and Fault Blanking

19-2631; Rev 0; 7/03
EVAALVUAAILTAIOBNLEKIT _{Programmable 4A USB Current-Limited}
Switches with Autoreset and Fault Blanking
General Description
The MAX1562/MAX1562H/MAX1563 single current-
limited switches provide up to 4A to power up to eight
USB ports. They operate from a 4V to 5.5V input
supply and consume only 40µA of quiescent current
when operating and only 3µA in shutdown.
The MAX1562/MAX1562H/MAX1563s’ autoreset feature
latches the switch off if the output is shorted, thereby
saving system power. When the short is removed, the
switch is reactivated. A fault-blanking feature enables the
circuit to ignore momentary faults, such as those caused
when hot swapping a capacitive load, preventing false
alarms to the host system. Fault blanking also prevents
fault signals from being issued when the device powers
up the load.
The MAX1562/MAX1562H/MAX1563 provide several
safety features to protect the USB port. Built-in thermal-
overload protection turns off the switch when the die
temperature exceeds +160°C. Accurate internal cur-
rent-limiting circuitry protects the input supply against
both overload and short-circuit conditions. An open-
drain fault signal (FAULT) notifies the microprocessor
when a thermal-overload, current-limit, undervoltage
lockout (UVLO), or short-circuit fault occurs.
The MAX1562 has an active-low ON, and the
MAX1562H has an active-high ON enable input. The
MAX1563 has a selectable active-high or active-low
logic-controlled enable. The current limit is pro-
grammed from 1A to 4A using a resistor.
The MAX1562/MAX1562H are available in 8-pin SO
packages and are pin-compatible upgrades to the
MIC2545A/MIC2549A. The MAX1563 provides the
same features and higher current performance in a
smaller 12-pin (4mm x 4mm) QFN package. These
devices operate over an extended temperature range
(-40°C to +85°C). An evaluation kit is available to speed
designs.
Applications
Notebook Computers
Desktop Computers
USB Ports and Hubs
PDAs and Palmtop Computers
Docking Stations
Features
o Programmable Current Limit (1A to 4A) with
Resistor
o Autoreset Feature Saves System Power
o 20ms Fault-Blanking Circuitry
o Active-High/Low Control Logic
o Fault-Indicator Output
o Thermal-Overload Protection
o Smaller 4mm x 4mm QFN Package (MAX1563)
o 3µA Shutdown Current
o UL Certification Pending
PART
MAX1562ESA
MAX1562HESA
MAX1563ETC
Ordering Information
TEMP RANGE
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
PIN-PACKAGE
8 SO
8 SO
12 QFN 4mm x 4mm
Typical Operating Circuit
IN
INPUT
4V TO 5.5V
IN
FAULT
MAX1562
MAX1562H
ON ^MAX1563
ACTIVE-HIGH/ACTIVE-LOW
SELECTABLE
SEL
MAX1563
ONLY
OUT
USB
PORT
ISET
OUT
GND
Pin Configurations appear at end of data sheet.
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.