MAX14527 Datasheet, PDF (1/7 Pages) Maxim Integrated Products – Adjustable Overvoltage Protector with High Accuracy

19-4357; Rev 0; 10/08
Adjustable Overvoltage Protector
with High Accuracy
General Description
The MAX14527/MAX14528 overvoltage protection
devices feature a low 100mΩ (typ) R_ON internal FET
and protect low-voltage systems against voltage faults
up to +28V. When the input voltage exceeds the over-
voltage threshold, the internal FET is turned off to pre-
vent damage to the protected components.
The overvoltage protection threshold can be adjusted
with optional external resistors to any voltage between
4V and 8V. With the OVLO input set below the external
OVLO select voltage, the MAX14527/MAX14528 auto-
matically choose the internal ±2.5% accurate trip
thresholds. The internal overvoltage thresholds (OVLO)
are preset to 5.75V typical (MAX14527) or 6.76V typical
(MAX14528). The MAX14527/MAX14528 are also
protected against overcurrent events with an internal
thermal shutdown.
The MAX14527/MAX14528 are offered in a small, 8-pin
TDFN-EP package and operate over the -40°C to
+85°C extended temperature range.
Features
♦ Input Voltage Protection Up to +28V
♦ Preset Internal ±2.5% Accurate OVLO Thresholds
5.75V (MAX14527)
6.76V (MAX14528)
♦ Adjustable Overvoltage Protection Trip Level
♦ Integrated 100mΩ (typ) n-Channel MOSFET
Switch
♦ Soft-Start to Minimize In-Rush Current
♦ Automatic Overvoltage Protection Trip-Level
Selection
♦ Internal 15ms Startup Delay
♦ Thermal Shutdown Protection
♦ 8-Pin TDFN (2mm x 2mm) Package
♦ -40°C to +85°C Operating Temperature Range
Applications
Cell Phones
Media Players
PDAs and Palmtop Devices
Pin Configuration appears at end of data sheet.
Ordering Information
PART
PIN-PACKAGE
TOP
MARK
OVLO
(V)
MAX14527ETA+T 8 TDFN-EP*
MAX14528ETA+T 8 TDFN-EP*
ACR
5.75
ACS
6.76
Note: Devices are specified over the -40°C to +85°C tempera-
ture range.
+Denotes a lead-free/RoHS-compliant package.
T = Tape and reel.
*EP = Exposed pad.
Typical Application Circuit
VBUS
USB
CONNECTOR
1µF
R1
*
R2
IN
OUT
IN
OUT
MAX14527
MAX14528
OVLO
GND
CHARGER
INPUT
PMIC
*R1 AND R2 ARE REQUIRED ONLY FOR ADJUSTABLE OVLO; OTHERWISE, CONNECT OVLO TO GND.
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim's website at www.maxim-ic.com.