DSTINIS400_08 Datasheet, PDF (1/12 Pages) Maxim Integrated Products – Sockets Evaluation Board

www.maxim-ic.com
GENERAL DESCRIPTION
The TINI^® sockets boards are motherboards
designed to host the corresponding TINI evaluation
module. The combination of the two boards allows
full evaluation of the features of the target
microprocessor. To evaluate the DS80C400, you
only need to order the DS80C400-KIT. To evaluate
the DS80C410 or DS80C411, you must order both
the DSTINIm410# and the DSTINIs400# and use
them together. The DSTINIm410# is used to evaluate
both the DS80C410 and DS80C411.
Although various boards support different evaluation
modules, the most popular is the DSTINIs400#. It
includes a 144-pin SODIMM connector and provides
1-Wire^®, CAN 2.0B, serial, and a 10/100 Ethernet
PHY for connecting the DSTINIm400# or
DSTINIm410# to the physical world.
The DSTINIm400# and DSTINIm410# are designed
as modules to be plugged into the 144-pin SODIMM
connector on the DSTINIs400#. All are fully
assembled and, when used together in the correct
combinations, they form a complete evaluation
system for the network microcontroller. The
DSTINIm400# and DSTINIm410# modules include
the DS80C400 and DS80C410 network
microcontrollers, a real-time clock, 1MB flash, 1MB
static RAM, and support for an external Ethernet
PHY for connecting to a wide variety of networks.
Detailed information about the initial setup process
and use of the TINI platform is contained in
Application Note 612: Getting Started with the
TINIm400 (DS80C400) Verification Module.
ORDERING INFORMATION
PART
INPUT
VOLTAGE*
USED WITH
MODULE
DIMENSIONS
DSTINIs400
Replaced with DSTINIs400#
DSTINIs400#
5V DC
regulated
DSTINIm400
12cm x 10cm
DSTINIs-005
5V DC
regulated
DSTINI1-1MG,
DSTINI1-512
16cm x 10cm
DSTINIs-006
9V to 18V
DC
DSTINI1-1MG,
DSTINI1-512
16cm x 10cm
Note: The DSTINIm400 is an evaluation board and is only tested to
prototype standards. It is not tested for use in a production product.
*The user must supply an external power supply.
# Denotes a RoHS-compliant device that may include lead that is
exempt under the RoHS requirements.
DSTINIs400/DSTINIs-00x
Sockets Evaluation Board
FEATURES
Hosts the TINI Runtime Environment in
Validated Hardware Design (in Conjunction
with the DSTINIm400)
10/100 Base-T Ethernet Port
Two Serial Ports
Dual 1-Wire Network Ports
CAN 2.0B Port
5.0V Single-Supply Operation (DSTINIm400)
Fully Assembled and Tested Design
COMPONENT LIST
DESIGNATION QTY
DESCRIPTION
C1
C2, C4, C5, C6
C3, C7, C9, C13,
C15, C26, C28,
C30, C38
C12, C14, C17,
C19, C25, C27,
C29, C33, C37
C8
C10, C31, C32,
C34, C35, C36
C11
1 47pF capacitor (1206)
4
47μF tantalum
capacitors (3528-21)
9 100nF capacitors (1206)
9 10nF capacitors (1206)
1 220nF, 16V capacitor (1206)
6 1.0μF capacitors (1206)
1 4.7μF capacitor (1206)
TINI and 1-Wire are registered trademarks of Maxim Integrated
Products, Inc.
1 of 12
REV: 061608