DSTINIM400 Datasheet, PDF (1/5 Pages) Maxim Integrated Products – Networked Microcontroller Evaluation Kit

DS80C400 (DSTINIm400)
Networked Microcontroller Evaluation Kit
www.maxim-ic.com
GENERAL DESCRIPTION
The DSTINIm400 is a fully assembled and tested
circuit board that evaluates the DS80C400 network
microcontroller. In addition to the DS80C400, the
DSTINIm400 includes a real-time clock, 1MB flash,
1MB static RAM, and support for an external
Ethernet PHY for connecting to a wide variety of
networks. The circuit board is designed as a module
to be plugged into a 144-pin SODIMM connector. For
evaluation, the DSTINIm400 can be inserted into the
DSTINIs400 socket board. The combination of the
two boards allows full evaluation of the features of
the DS80C400 using an Ethernet network.
Detailed information about the initial setup process
and use of the TINI platform is contained in
Application Note 612: Getting Started with the
TINIm400 (DS80C400) Verification Module.
ORDERING INFORMATION
PART
TEMP RANGE
DIMENSIONS
DSTINIm400
0°C to +70°C
Approx. 67mm x
48mm, 144 SODIMM
Note: To evaluate the DS80C400, order both a DSTINIm400 and
a DSTINIs400.
FEATURES
§ Hosts the TINI^® Runtime Environment in
Validated Hardware Design (in Conjunction with
the DSTINIs400)
§ Industry Standard MII Interface to Connects to
Network Interfaces Including 10/100 Base-T,
Optical, and HomePNA
§ Three Hardware Serial Ports
§ Integrated 1-Wire^® Network Master
§ CAN2.0B Port
§ Real-Time Clock for Time Stamping
§ 1MB Flash ROM for Application Storage
§ 1MB NV SRAM for Data Storage
§ 3.3V Single-Supply Operation
§ Fully Assembled and Tested Design
COMPONENT LIST
DESIGNATION QTY
DESCRIPTION
C1–C5,
C8–C14, C17,
C18
C6, C7
C15
C16
C19, C20
BT1
14
0.1mF, ±20%, 10V ceramic
capacitors (0805)
2
27pF, ±20%, 50V C0G ceramic
capacitors (0805)
1
1.0mF, ±20%, 10V ceramic
capacitor (1206)
1
4.7mF, ±20%, 10V ceramic
capacitor (1206)
2
47mF, ±20%, tantalum
capacitors (C)
1 CR1632 3V lithium cell
DESIGNATION
DN1
DS1
Q1, Q3
Q2
R1, R4, R7, R8
R2
R3
R5
QTY
1
1
2
1
4
1
1
1
DESCRIPTION
BAT54S diode (SOT23)
SML-LX23SRC Lumex LED
BSS84 P-Channel FET
(SOT23)
2N7002 N-Channel FET
(SOT23)
10kW, ±5% resistors (0805)
1.5kW, ±5% resistor (0805)
1kW, ±5% resistor (0805)
2.2kW, ±5% resistor (0805)
TINI and 1-Wire are registered trademarks of Dallas Semiconductor.
1 of 5
REV: 013004