English
Language : 

DS3911 Datasheet, PDF (1/24 Pages) Maxim Integrated Products – Temperature-Controlled, Nonvolatile, I2C Quad DAC
19-5933; Rev 0; 6/11
DS3911
Temperature-Controlled, Nonvolatile,
I2C Quad DAC
General Description
The DS3911 is a quad, 10-bit delta-sigma output, nonvol-
atile (NV) controller that features an on-chip temperature
sensor and associated analog-to-digital converter (ADC).
The integrated temperature sensor indexes the up to
2NC resolution NV lookup tables (LUTs), encompassing
a -40NC to +100NC temperature range. The LUT directly
drives the delta-sigma digital-to-analog converter (DAC)
outputs. This flexible LUT-based architecture allows the
device to provide a temperature-compensated DAC out-
put with arbitrary slope. Programming is accomplished
by an I2C-compatible interface that operates at speeds
of up to 400kHz.
Applications
Active Optical Cables
Optical Transceivers
Linear and Nonlinear Compensation
Instrumentation and Industrial Controls
Features
S Four 10-Bit Delta-Sigma Outputs
S On-Chip Temperature Sensor and ADC
S Four Temperature-Indexed LUTs, Up to 2NC
Resolution
S I2C-Compatible Serial Interface
S Address Pins Allow Up to Four DS3911s to Share
the Same I2C Bus
S 2.8V to 5.5V Digital Supply
S -40NC to +100NC Operating Temperature Range
S 3mm x 5mm, 14-Pin TDFN Package
Ordering Information appears at end of data sheet.
For related parts and recommended products to use with this part,
refer to www.maxim-ic.com/DS3911.related.
Typical Operating Circuit
I2C
MASTER
3.3V
RPU
DS3911
SDA
SCL
I2C
A1
SLAVE
A0
TEMP
SENSOR
VCC
VCC
GND
VREF
VREF
GND
3.3V
0.1µF 3.3V
100Ω
0.1µF
2.5V
EEPROM
LUT
R1
R2
10-BIT DAC0
DAC
C1
C2
MODSET LASER
APCSET DRIVER
EEPROM
LUT
10-BIT DAC1
DAC
MODSET LASER
APCSET DRIVER
EEPROM
LUT
10-BIT DAC2
DAC
MODSET LASER
APCSET DRIVER
EEPROM
LUT
10-BIT DAC3
DAC
MODSET LASER
APCSET DRIVER
����������������������������������������������������������������� Maxim Integrated Products   1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.