DS2430A Datasheet, PDF (1/19 Pages) Dallas Semiconductor – 256-Bit 1-Wire EEPROM

19-5236; 4/10
DS2430A
www.maxim-ic.com
FEATURES
 256-bit Electrically Erasable Programmable
Read Only Memory (EEPROM) plus 64-bit
one-time programmable application register
 Unique, factory-lasered and tested 64-bit
registration number (8-bit family code + 48-bit
serial number + 8-bit CRC tester) assures
absolute identity because no two parts are alike
 Built-in multidrop controller ensures
compatibility with other MicroLAN products
 EEPROM organized as one page of 32 bytes
for random access
256-Bit 1-Wire EEPROM
NS _{PIN ASSIGNMENT}
G _TO-92
I _DALLAS
DES ^DS2430A
TSOC PACKAGE
1
6
2
5
3
4
TOP VIEW
3.7mm x 4.0mm x 1.5mm
NEW ^{SIDE VIEW}
 Reduces control, address, data, and power to a
single data pin
 Directly connects to a single port pin of a
microprocessor and communicates at up to
15.3kbits per second
FOR ^{1 2 3}
 8-bit family code specifies DS2430A
communication requirements to reader
D _{ Presence detector acknowledges when reader}
E _{first applies voltage}
D  Low cost TO-92 or 6-pin TSOC and UCSP
surface mount package
N _{ Reads and writes over a wide voltage range of}
E _{2.8V to 5.25V from -40°C to +85°C}
M _{ORDERING INFORMATION}
DS2430A+
TO-92 Package
M _DS2430AP+
6-pin TSOC Package
O _{DS2430A+T&R TO-92 Package, Tape & Reel}
DS2430AP+T&R TSOC Package, Tape & Reel
C _{+Denotes a lead(Pb)-free/RoHS-compliant}
E _package.
Contact factory for availability of the UCSP
NOT ^{R version.}
123
BOTTOM VIEW
See Mech.
Drawings Section
NOTE: The leads of TO-92 packages on tape-
and-reel are formed to approximately 100 mil
(2.54 mm) spacing. For details see Package
Information.
PIN DESCRIPTION
TO-92 TSOC
Pin 1 Ground Ground
Pin 2 Data
Data
Pin 3 NC
NC
Pin 4 ––––
NC
Pin 5 ––––
NC
Pin 6 ––––
NC
1 of 19