DS2155DK Datasheet, PDF (1/21 Pages) Maxim Integrated Products – Single-Chip Transceiver Design Kit Daughter Cards

www.maxim-ic.com
DS2155DK/DS2156DK
T1/E1/J1 Single-Chip Transceiver
Design Kit Daughter Cards
GENERAL DESCRIPTION
The DS2155/DS2156 design kits are evaluation
boards for the DS2155 and DS2156. The
DS2155/DS2156 design kits are intended to be used
as daughter cards with either the DK2000 or the
DK101 motherboards. The boards are complete with
a single-chip transceiver (SCT), transformers,
termination resistors, configuration switches, line
protection circuitry, network connectors, and an
interface to the motherboard.
ORDERING INFORMATION
PART
DESCRIPTION
DS2155DK
DS2155 Design Kit Daughter Card
DS2156DK
DS2156 Design Kit Daughter Card
FEATURES
Expedites New Designs by Eliminating First-
Pass Prototyping
Interfaces Directly to the DK101 or DK2000
Motherboards
Demonstrates Key Functions of the DS2156
and DS2155
High-Level Software Provides Visual Access
to Registers
Software-Controlled (Register Mapped)
Configuration Switches to Facilitate Clock
and Signal Routing
BNC Connections for 75Ω E1
Bantam and RJ48 Connectors for 120Ω E1
and 100Ω T1
Multitap Transformer to Facilitate True
Impedance Matching for 75Ω and 120Ω/100Ω
Paths
Network Interface Protection for Overvoltage
and Overcurrent Events
UTOPIA II Bus Connection for MPC8260
(DS2156 Only)
UTOPIA II Prototype Connectors (DS2156
Only)
Test Points and Prototype Area Available for
Further Customization
1 of 21
REV: 110106