|
DS18B20-PAR_07 Datasheet, PDF (1/19 Pages) Maxim Integrated Products – 1-Wire Parasite-Power Digital Thermometer | |||
|
www.maxim-ic.com
FEATURES
⢠Unique 1-Wire® interface requires only one
port pin for communication
⢠Derives power from data line (âparasite
powerâ)âdoes not need a local power supply
⢠Multi-drop capability simplifies distributed
temperature sensing applications
⢠Requires no external components
⢠±0.5°C accuracy from â10°C to +85°C
⢠Measures temperatures from â55°C to
+100°C (â67°F to +212°F)
⢠Thermometer resolution is user-selectable
from 9 to 12 bits
⢠Converts temperature to 12-bit digital word in
750 ms (max.)
⢠Userâdefinable non-volatile temperature
alarm settings
⢠Alarm search command identifies and
addresses devices whose temperature is
outside of programmed limits (temperature
alarm condition)
⢠Software compatible with the DS1822-PAR
⢠Ideal for use in remote sensing applications
(e.g., temperature probes) that do not have a
local power source
DS18B20-PAR
1-Wire Parasite-Power
Digital Thermometer
PIN ASSIGNMENT
DALLAS
18B20P
123
12 3
(BOTTOM VIEW)
TO-92
(DS18B20-PAR)
PIN DESCRIPTION
GND - Ground
DQ - Data In/Out
NC - No Connect
DESCRIPTION
The DS18B20-PAR digital thermometer provides 9 to 12âbit centigrade temperature measurements and
has an alarm function with nonvolatile user-programmable upper and lower trigger points. The
DS18B20-PAR does not need an external power supply because it derives power directly from the data
line (âparasite powerâ). The DS18B20-PAR communicates over a 1-Wire bus, which by definition
requires only one data line (and ground) for communication with a central microprocessor. It has an
operating temperature range of â55°C to +100°C and is accurate to ±0.5°C over a range of â10°C to
+85°C.
Each DS18B20-PAR has a unique 64-bit identification code, which allows multiple DS18B20-PARs to
function on the same 1âwire bus; thus, it is simple to use one microprocessor to control many DS18B20-
PARs distributed over a large area. Applications that can benefit from this feature include HVAC
environmental controls, temperature monitoring systems inside buildings, equipment or machinery, and
process monitoring and control systems.
1-Wire is a registered trademark of Dallas Semiconductor.
1 of 19
101207
|
▷ |