DS1091L_12 Datasheet, PDF (1/9 Pages) Maxim Integrated Products – Automotive Temperature Range Spread-Spectrum EconOscillator™

DS1091L
Automotive Temperature Range
Spread-Spectrum EconOscillator™
General Description
The DS1091L is a low-cost clock generator that is factory
trimmed to output frequencies from 130kHz to 66.6MHz
with a nominal accuracy of ±0.25%. The device can also
produce a center- or down-dithered spread-spectrum
output with pin-selectable dither magnitude and rate.
Assembled in an 8-pin µMAX^® package, the DS1091L
is designed to operate with a 3.0V to 3.6V power supply
over the automotive temperature range (-40°C to +125°C).
Applications
Automotive Infotainment
POS Terminals
LCD Displays
Printers
Industrial Control
Features
S Spread-Spectrum Clock Output from 130kHz to
66.6MHz
S -40°C to +125°C Operating Temperature Range
S ±1.75% Accuracy Across Temperature and Voltage
S Factory Trimmed
S Center-Dithered (DS1091LUA) or Down-Dithered
(DS1091LUB) Spread-Spectrum Output
S Pin-Selectable Center-Dither Magnitude of 0%,
±1%, ±2%, or ±4%
S Pin-Selectable Down-Dither Magnitude of 0%, -2%,
-4%, or -8%
S Pin-Selectable Dither Rate
S 3.0V to 3.6V Supply Operation
S Lead(Pb)-Free, 8-Pin µMAX Package
Typical Operating Circuit
f_OUT
V_CC
DECOUPLING
CAPACITORS
OUT ₁
VCC ₂
GND
3
DS1091L
V_CC
DR
8
N.C.
7
N.C.
6
VCC
Custom Frequency Options
Custom frequency options are available. See the Ordering
Information or contact the factory by email at custom.
[e-mail] for more information.
Ordering Information appears at end of data sheet.
SEL1 ₄
5 ^SEL0
EconOscillator is a trademark and µMAX is a registered trademark of Maxim Integrated Products, Inc.
For related parts and recommended products to use with this part, refer to: www.maximintegrated.com/DS1091L.related
For pricing, delivery, and ordering information, please contact Maxim Direct at
1-888-629-4642, or visit Maxim Integrated’s website at www.maximintegrated.com.
19-5768; Rev 2; 9/11