MAS6181B Datasheet, PDF (1/15 Pages) Micro Analog systems – AM Receiver IC

DA6181B.002
5 May, 2011
MAS6181B
AM Receiver IC
• Dual Band Receiver IC
• High Sensitivity
• Very Low Power Consumption
• Wide Supply Voltage Range
• Power Down Control
• Control for AGC On
• High Selectivity by Crystal Filter
• Fast Startup Feature
DESCRIPTION
The MAS6181 AM-Receiver chip is a highly sensitive,
simple to use AM receiver specially intended to
receive time signals in the frequency range from 40
kHz to 100 kHz. Only a few external components are
required for time signal receiving. The circuit has
preamplifier, wide range automatic gain control,
demodulator and output comparator built in. The
output signal can be processed directly by an
additional digital circuitry to extract the data from the
received signal. The control for AGC (automatic gain
control) can be used to switch AGC on or off if
necessary.
The MAS6181 supports receiving two different
frequency signals by two selective crystal filters and
an integrated switch to switch between two antenna
frequencies. It has differential input for improved
common mode disturbance rejection.
FEATURES
• Dual Band Receiver IC
• Highly Sensitive AM Receiver
• Wide Supply Voltage Range from 1.1 V to 3.6 V
• Very Low Power Consumption
• Power Down Control
• Fast Startup
• Only a Few External Components Necessary
• Control for AGC On
• Wide Frequency Range from 40 kHz to 100 kHz
• High Selectivity by Quartz Crystal Filter
• Differential Input
APPLICATIONS
• Multi Band Time Signal Receiver WWVB (USA),
JJY (Japan), DCF77 (Germany), MSF (UK), HBG
(Switzerland) and BPC (China)
BLOCK DIAGRAM
VDD
RFIP VDD
RFIM
QO2 QO1 QI
AGC Amplifier
AON
Demodulator
&
OUT
Comparator
RFI2
Power Supply/Biasing
VDD VSS PDN1 PDN2 AGC
DEC
1 (15)