677 Datasheet, PDF (2/5 Pages) Littelfuse – Axial Lead and Cartridge Fuses - Ceramic Body

677 EMC series
technical data
Header
3.2
23.8
6
7.5+00.1
Mounting Hole
Dimensions in mm (typical)
Not to scale
housing material
Body
Nut
Panel Seal
Fresnel Lens
Encapsulation
Lock Washer
Termination
Header
Black Anodised Aluminium
Bright Nickel Plated Brass
Conductive Rubber
Silver Flash Coated Brass
PC5430 Resin
Spring Steel
Silver Flash Coated Brass
-
technical characteristics
Series
677
units
Max. Power
Dissipation
700
mW
Max. Reverse
Voltage
3*/1000^
Vdc
* = Current Version
^ = Voltage Version
optional flying lead terminations
Panel Cutout
8.1
mm
Order Code
Suffix
Supply
Voltage
Wire
Colour
Wire
Length
19
DC products Red-anode/ Black-cathode 1000mm
to order
Anode termination denoted by red indicator
Mounting hole to be clean and burr free
push on connectors
925-000-00 is brass tin plated - for use
with 677 series lamps
Dimensions in mm (typical). Not to scale.
Nut Mounting
Torque
0.6
Nm
Min. Mounting
Centres
14.5
mm
Max. Panel
Thickness
1.5 - 13.0
mm
No/Diameter
of Conductor
19/0.15mm
Diameter
Insulation
1.2mm
Comments
Customised
lengths
available
to order please contact us on: t: [phone] f: [phone]
e: [e-mail] w: www.leds.co.uk
© marl international limited technical documentation has been designed by marl international limited for the intention of
providing information, which must not be copied or released to a third party without prior written consent from marl
international limited. the information provided does not constitute part of any order or contract and should not be regarded as a
representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl
international limited reserve the right to alter without notice the specification or any conditions of supply for product or service.
marl international limited - dsn 677 EMC - version 2012-12-06-114032
BS EN ISO 9001:2008
approved manufacturer
page 2 of 5