672 Datasheet, PDF (2/4 Pages) Littelfuse – Axial Lead and Cartridge Fuses - Glass Body

672 series
technical data
Header
18
37
10
25.4^+00.2
Mounting Hole
Dimensions in mm (typical)
Not to scale
housing material
Body
Nut
Panel Seal
Fresnel Lens
Encapsulation
Lock Washer
Termination
Header
Black Anodised Aluminium
Aluminium
Neoprene
Epoxy
PC5430 Resin
Spring Steel
Tin Plated Brass
-
technical characteristics
Series
672
units
Max. Power
Dissipation
2500
mW
Max. Reverse
Voltage
-
Vdc
* = Current Version
^ = Voltage Version
optional flying lead terminations
Panel Cutout
25.4
mm
Order Code
Suffix
Supply
Voltage
Wire
Colour
Wire
Length
19
DC products Red-anode/ Black-cathode 1000mm
to order
Anode termination denoted by red indicator
Mounting hole to be clean and burr free
push on connectors
926-000-00 is brass rin plated with vinyl
insulation - for use with 672 series lamps
Dimensions in mm (typical). Not to scale.
Nut Mounting
Torque
1.2
Nm
Min. Mounting
Centres
41.0
mm
Max. Panel
Thickness
2.0 - 10.0
mm
No/Diameter
of Conductor
-
Diameter
Insulation
-
Comments
Customised
lengths
available
to order please contact us on: t: [phone] f: [phone]
e: [e-mail] w: www.leds.co.uk
© marl international limited technical documentation has been designed by marl international limited for the intention of
providing information, which must not be copied or released to a third party without prior written consent from marl
international limited. the information provided does not constitute part of any order or contract and should not be regarded as a
representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl
international limited reserve the right to alter without notice the specification or any conditions of supply for product or service.
marl international limited - dsn 672 - version 2012-12-06-114014
BS EN ISO 9001:2008
approved manufacturer
page 2 of 4