612-301-21 Datasheet, PDF (2/3 Pages) Marl International Limited – PROFESSIONAL LED INDICATORS Ø6.35mm Mounting

612 Series
Mounting Hole
Dimensions in mm (Typical)
Not to scale
Anode termination indicated by long pin.
Mounting hole to be clean and burr free
Body
MATERIALS
Black Anodised Aluminium
PUSH-ON CONNECTORS
Nut
Bright Nickel Plated Brass
Panel Seal
Viton
Termination Tags
Fresnel lens
Encapsulation
Lock Washer
Tin Plated Phosphor Bronze
Polycarbonate
Epoxy
Spring Steel
909-000-00 is gold plated.
910-000-00 is tin plated.
For use with 612 series lamps.
Dimensions in mm (Typical)
Not to scale
SERIES
MAXIMUM
POWER
DISSIPATION
TECHNICAL CHARACTERISTICS
MAXIMUM
REVERSE
VOLTAGE
PANEL
CUTOUT
NUT
MOUNTING
TORQUE
MINIMUM
MOUNTING
CENTRES
MIN/MAX.
PANEL
THICKNESS
612
500
mW
3* / 75•
Vdc
* = Current Version • = Voltage Version
6.35
mm
0.6
Nm
x,y = 11.0
mm
1.5-7.0
mm
ORDER
CODE
SUFFIX
15
15
19
19
OPTIONAL FLYING LEAD TERMINATIONS
SUPPLY
VOLTAGE
WIRE
COLOUR
WIRE
LENGTH
NO/DIAMETER
OF
CONDUCTORS
DIAMETER
OVER
INSULATION
COMMENTS
DC Products
Red-anode / Black-cathode 150mm
AC Products
Brown-live / Blue-neutral
150mm
DC Products
Red-anode / Black-cathode 1000mm
19/0.15mm
1.2mm
Customised
lengths
available
AC Products
Brown-live / Blue-neutral
1000mm
website: www.marl.co.uk _• email: [e-mail] _•
• ^{Telephone [phone]} • ^{Fax: [phone]}
The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation
relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply
for products or service.
© MARL INTERNATIONAL LTD 2007 : DS 016/07 Issue 2
BS EN ISO 9001:2000
Approved Manufacturer
Page 2 of 3