612-301-04_15 Datasheet, PDF (2/2 Pages) Marl International Limited – PANEL INDICATOR LED

612 SERIES
PANEL INDICATOR LED
TECHNICAL CHARACTERISTICS
Series
612
Max. Power
Dissipation
Max. Reverse
Voltage
500
3*/75^
mW
Vdc
* = Current version ^ = Voltage version
Panel Cutout
6.35
mm
Nut Mounting
Torque
0.6
Nm
TECHNICAL DRAWING
Weight (g): 5
Dimensions in mm (typical). Not to scale. Mounting hole to be clean and burr free. Anode termination denoted by long pin.
2.5
15
10
+ 0.1
6.35 0
Min. Mounting
Centres
11.0
mm
Min. - Max. Panel
Thickness
1.5 - 7.0
mm
PUSH ON CONNECTOR
11.8
Mounting Hole
909-000-00 is gold plated, 910-000-00 is tin plated - for use
with 612 series lamps.
Dimensions in mm (typical). Not to scale.
DE-RATING GRAPHS
Red / Yellow LED
50
Blue / Green LED
50
Cool White LED
50
Red+Green Bi-Colour LED
50
40
40
40
40
30
30
20
20
10
0
0
20 40 60 80 100
Ambient Temperature Ta (°C)
10
8.5
0
0
20 40 60 80 100
Ambient Temperature Ta (°C)
MATERIALS
Body
Nut
Panel Seal
Lens
Encapsulation
Lock Washer
Termination
Black Anodised Aluminium
Nickel Plated Brass
Viton
Polycarbonate
Black Polyurethane
Spring Steel
Silver Flash Coated Brass
DESIGN CONSIDERATIONS
30
20
10
8.5
0
0
20 40 60 80 100
Ambient Temperature Ta (°C)
30
20
R
G
10
7.5
5
0
0
20 40 60 80 100
Ambient Temperature Ta (°C)
Electro-Static Discharge (ESD)
Build up of electro-static discharge occurs in many situations
involving people moving and handling products.The range
of possible situations is very diverse but voltage levels as
high as several thousand volts can and do arise in many
individual situations. When an operator charged up to these
levels handles a static sensitive device, there is a very
probable likelihood that the device will be irreversibly
damaged. It is essential that precautions are taken at all
stages during manufacture and assembly of these products.
Although LEDs were never considered to be static sensitive
devices, changes in manufacturing technology and
materials used to produce higher intensity products over a
large range of the wavelength spectrum have changed this.
Marl has an approved system of ESD control from goods
in, through production and into final packing and despatch.
Marl recommend all users of LED based products follow the
guidelines of BS 100015.
Voltage, Current and Temperature
The forward voltage / current value of an LED is dependent
upon the ambient temperature of the environment in which
it is operated. Therefore, care must be taken to operate the
LED at the correct voltage / current values, depending upon
the ambient temperature.
Marl should be contacted if the device is to be operated
outside the temperature range specified. Marl accept no
liability for any product that is operated outside the stated
voltage or temperature range.
To order please contact us on [phone]
F [phone] | E [e-mail] | www.leds.co.uk
marlleds
marlinternationallimited
company/marl-international-limited
Q 05480
DSN 612 Version 2015-10-01-133500. Page 2 of 2