603-301-04 Datasheet, PDF (2/3 Pages) Marl International Limited – PROFESSIONAL LED INDICATORS Ø5.0mm Mounting

603 Series
MOUNTING HOLE
Dimensions in mm (Typical)
Not to scale
Anode termination indicated by red lead.
Mounting hole to be clean and burr free
Body
Nut
Panel Seal
Fresnel lens
Encapsulation
Lock Washer
MATERIALS
Bright Nickel Plated Brass
Bright Nickel Plated Brass
Viton
Polycarbonate
Epoxy
Beryllium Copper
TECHNICAL CHARACTERISTICS
SERIES
MAXIMUM
POWER
DISSIPATION
MAXIMUM
REVERSE
VOLTAGE
603
425
3* / 75•
mW
Vdc
* = Current Version • = Voltage Version
PANEL
CUTOUT
5.0
mm
NUT
MOUNTING
TORQUE
0.35
Nm
MINIMUM
MOUNTING
CENTRES
MIN/MAX.
PANEL
THICKNESS
x,y =10.0
1.5-8.0
mm
mm
ORDER
CODE
SUFFIX
19
SUPPLY
VOLTAGE
OPTIONAL FLYING LEAD TERMINATIONS
WIRE
COLOUR
WIRE
LENGTH
NO/DIAMETER
OF
CONDUCTORS
DIAMETER
OVER
INSULATION
COMMENTS
DC Products
Red-anode / Black-cathode 1000mm
19/0.15mm
1.2mm
Customised
lengths
available
website: www.marl.co.uk _• email: [e-mail] _•
• ^{Telephone [phone]} • ^{Fax: [phone]}
The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation
relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply
for products or service.
© MARL INTERNATIONAL LTD 2008 : DS 004/08 Issue 1
SAMPLES AVAILABLE
BS EN ISO 9001:2000
Approved Manufacturer
Page 2 of 3