603-301-04-58 Datasheet, PDF (2/2 Pages) Marl International Limited – PANEL INDICATOR LED

603 SERIES EMC
PANEL INDICATOR LED
TECHNICAL CHARACTERISTICS
Series
603
Max. Power
Dissipation
425
mW
Max. Reverse Voltage Panel Cutout
5
5.0
Vdc
mm
Nut Mounting
Torque
0.35
Nm
TECHNICAL DRAWING
Weight (g): 1.75
Dimensions in mm (typical). Not to scale. Mounting hole to be clean and burr free. Anode termination denoted by red indicator.
2.5
15.2
+ 0.1
50
Min. Mounting
Centres
10.0
mm
Min. - Max. Panel
Thickness
1.5 - 8.0
mm
PUSH ON CONNECTOR
11.8
2
12.0 Min.
1.2 Typ.
Mounting hole
909-000-00 is gold plated, 910-000-00 is tim plated - for use
with 603 series lamps.
Dimensions in mm (typical). Not to scale.
DE-RATING GRAPHS
Red / Yellow High Intensity LED
50
Blue / Green High Intensity LED
50
Cool White High Intensity LED
50
40
40
40
30
30
30
20
20
20
10
0
0
20 40 60 80 100
Ambient Temperature Ta (°C)
10
8.5
0
0
20 40 60 80 100
Ambient Temperature Ta (°C)
Red Standard Intensity LED
50
Yellow Standard Intensity LED
50
40
40
30
30
20
20
10
10
0
0
20 40 60 80 100
Ambient Temperature Ta (°C)
MATERIALS
0
0
20 40 60 80 100
Ambient Temperature Ta (°C)
Body
Nut
Panel Seal
Fresnel Lens
Bright Nickel Plated Brass
Bright Nickel Plated Brass
Viton
Polycarbonate
DESIGN CONSIDERATIONS
Encapsulation
Lock Washer
EMC Mesh
Termination
10
8.5
0
0
20 40 60 80 100
Ambient Temperature Ta (°C)
Green Standard Intensity LED
50
40
30
20
10
0
0
20 40 60 80 100
Ambient Temperature Ta (°C)
Black Polyurethane
Beryllium Copper
Stainless Steel
LED Leads
Electro-Static Discharge (ESD)
Build up of electro-static discharge occurs in many situations
involving people moving and handling products.The range
of possible situations is very diverse but voltage levels as
high as several thousand volts can and do arise in many
individual situations. When an operator charged up to these
levels handles a static sensitive device, there is a very
probable likelihood that the device will be irreversibly
damaged. It is essential that precautions are taken at all
stages during manufacture and assembly of these products.
Although LEDs were never considered to be static sensitive
devices, changes in manufacturing technology and
materials used to produce higher intensity products over a
large range of the wavelength spectrum have changed this.
Marl has an approved system of ESD control from goods
in, through production and into final packing and despatch.
Marl recommend all users of LED based products follow the
guidelines of BS 100015.
Voltage, Current and Temperature
The forward voltage / current value of an LED is dependent
upon the ambient temperature of the environment in which
it is operated. Therefore, care must be taken to operate the
LED at the correct voltage / current values, depending upon
the ambient temperature.
Marl should be contacted if the device is to be operated
outside the temperature range specified. Marl accept no
liability for any product that is operated outside the stated
voltage or temperature range.
To order please contact us on [phone]
F [phone] | E [e-mail] | www.leds.co.uk
marlleds
marlinternationallimited
company/marl-international-limited
Q 05480
DSN 603EMC Version DS015/2016. Page 2 of 2