520 Datasheet, PDF (2/5 Pages) Marl International Limited – Ø6.1mm mounting Robust stainless steel housing

520 series
technical data
*
24
10
Dimensions in mm (typical)
Not to scale
housing material
Panel Seal
Sealing Ring
*Min/max panel thickness is 3mm / 6.5mm.
Anode termination indicated by long pin.
Mounting hole to be clean and burr free.
push on connectors
Body
Nut
Panel Seal
Termination
Lens
Encapsulation
Lock Washer
Header
Stainless Steel Grade 303
Stainless Steel Grade 303
Nitrile
Phosphor bronze with tin on nickel finish
Polycarbonate
PC5430 Resin
Stainless Steel
-
909-000-00 is gold plated, 910-000-00 is
tin plated - for use with 520 series lamps.
Dimensions in mm (typical). Not to scale.
technical characteristics
Series
520
units
Max. Power
Dissipation
500
mW
Max. Reverse
Voltage
1000^
Vdc
Panel Cutout
6.1
mm
* = Current version
^ = Voltage version
optional flying lead terminators
Nut Mounting
Torque
0.65
Nm
Min. Mounting
Centres
15.0
mm
Max. Panel
Thickness
3.0 - 6.5
mm
Order Code
Suffix
15
15
19
19
Supply
Voltage
DC products
AC products
DC products
AC products
Wire
Colour
Red-anode/ Black-cathode
Brown-live/ Blue-neutral
Red-anode/ Black-cathode
Brown-live/ Blue-neutral
Wire
Length
150mm
150mm
1000mm
1000mm
No/Diameter
of Conductor
19/0.15mm
Diameter
Insulation
1.2mm
Comments
Customised
lengths
available
to order
to order please contact us on: t: [phone] f: [phone]
e: [e-mail] w: www.leds.co.uk
© marl international limited technical documentation has been designed by marl international limited for the intention of
providing information, which must not be copied or released to a third party without prior written consent from marl
international limited. the information provided does not constitute part of any order or contract and should not be regarded as a
representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl
international limited reserve the right to alter without notice the specification or any conditions of supply for product or service.
marl international limited - dsn 520 - version 2013-02-19-173502
BS EN ISO 9001:2008
approved manufacturer
page 2 of 5