307-303-2 Datasheet, PDF (2/3 Pages) Marl International Limited – PANEL INDICATOR LEDs - Ø4.8mm Mounting

20.0
307 Series
20.0
9.0
Ø4.8
MOUNTING HOLE
Dimensions in mm (Typical)
Not to scale
Materials
Anode termination indicated by long tag.
Mounting hole to be clean an burr free
Push-on Connectors
Body
Nylon 6
Panel Washer
Neoprene
Termination Pins Tin on Nickel Plated Phosphor Bronze
Retaining Clip
Spring steel
Fresnel lens
Polycarbonate
Header
PTFE
909-000-00 is gold plated
910-000-00 is tin plated
for use with 307 series.
Suitable for wire sizes from
0.15mm² to 0.38mm² cross
sectional area.
Dual metal contact design
provides low resistance
and gas tight electrical
contact.
Dimensions in mm (Typical)
Not to scale
SERIES
307
UNITS
MAXIMUM
POWER
DISSIPATION
425
mW
MAXIMUM
REVERSE
VOLTAGE
3
Vdc
Technical Characteristics
PANEL
CUTOUT
4.8
mm
MINIMUM
MOUNTING
CENTRES
10.0
mm
MAX.
PANEL
THICKNESS
11.0
mm
ORDER
CODE
SUFFIX
13
13
17
17
SUPPLY
VOLTAGE
WIRE
COLOUR
Optional Flying Lead Terminations
WIRE
LENGTH
NO/DIAMETER
OF
CONDUCTORS
DIAMETER
OVER
INSULATION
COMMENTS
DC Products
Red-anode / Black-cathode 150mm
AC Products
Brown-live / Blue-neutral
150mm
DC Products
Red-anode / Black-cathode 1000mm
7/0.2mm
1.2mm
Customised
lengths
available
AC Products
Brown-live / Blue-neutral
1000mm
ORDER CODE
SUFFIX
01
CIRCUIT
Optional Reverse Protection Diode
COMMENTS
Available on all indicators except Bi-Colour
devices.
How to Order:
website: www.marl.co.uk _• email: [e-mail] _•
• ^{Telephone [phone]} • ^{Fax: [phone]}
The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation
relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply
for products or service.
© MARL INTERNATIONAL LTD 2007 : DS 046/07 Issue 1
SAMPLES AVAILABLE
BS EN ISO 9001:2000
Approved Manufacturer
Page 2 of 3